Altova XMLSpy 2025 Enterprise Edition

Validate EDGAR on Server

Home Prev Top Next

The Validate EDGAR on Server (high-performance) command validates the active XBRL instance document by using the currently active RaptorXML+XBRL Server and its active configuration. When you validate via EDGAR, Raptor validates the XBRL instance document using an internal EDGAR script. The command immediately carries out the validation and displays the results in the Messages window.

 

Note:The actual performance depends on the number of PC processor cores used by RaptorXML+XBRL Server for the validation: The higher the number of cores used, the faster will be the processing.

 

If you have defined multiple configurations on multiple servers, you can select a server and one of its configurations as the active configuration. The active configuration will be used for subsequent validations. On placing the cursor over the Tools | Raptor Servers and Configurations command (see screenshot below), a submenu appears that contains all the added servers, together with the configuration of each. Select the server configuration you want to make the active configuration. In the screenshot below, the xbrl configuration of the server named Raptor-01 has been selected as the active configuration (indicated by the green arrow).

inc-RXSSelectServerConfig

 

For more information, see the section that describes how to use RaptorXML+XBRL Server.

 

© 2018-2024 Altova GmbH