Altova MobileTogether Server Advanced Edition

Using MobileTogether Server

Home Prev Top Next

To set up MobileTogether Server for use with MobileTogether clients:

 

Install and configure MobileTogether Server

Deploy MobileTogether solutions from MobileTogether Designer to MobileTogether Server

Configure MobileTogether Client apps (on mobile devices) to access solutions on a MobileTogether Server

 

The steps in more detail:

 

1.Install MobileTogether Server

2.License MobileTogether Server

3.Set up SSL encryption

4.Define basic settings

5.Set up user accounts

6.Deploy MobileTogether solutions to MobileTogether Server

7.Configure MobileTogether Client apps to access MobileTogether Server

 

Server IP address and network firewall settings

Your server can have a public IP address (accessible over the Internet) and/or a private IP address (accessible within a private network; for example, via WiFi within a company network). If a mobile client device tries to connect via the Internet using the server's private IP address, then the connection will not work. This is because the private IP address is not known on the Internet and cannot be resolved. If a client device uses a private IP address, then the client device must already have access to the private network.

 

To ensure that the server can be accessed, do one of the following:

 

Provide the server with a public IP address so that it can be reached via the Internet. On the client device, use this public IP address to access the server.

If you use a firewall and install MobileTogether Server on a server with a private IP address (inside the private network), then use the network firewall to forward requests sent to a public IP-address/port-combination to your MobileTogether Server server. On the client device, use the public IP address.

 

You must also ensure that the firewall is configured to allow access to the server port used for MobileTogether Client communication. The ports used by MobileTogether Server are specified in the Settings page of the Web UI of MobileTogether Server (see the MobileTogether Server user manual). On the client device, this is the port that must be specified as the server port to access.

 

Tip: Port 80 is usually open on most firewalls by default. So, if you are having difficulties with firewall settings and if port 80 is not already bound to some other service, you could specify port 80 as the MobileTogether Server port for client communication.

 

 

© 2018-2024 Altova GmbH