StyleVision Server is available for installation on Linux systems. Its installation and setup procedure is described below.
If you are installing StyleVision Server together with FlowForce Server, it is recommended that you install FlowForce Server first. Otherwise, after having installed both StyleVision Server and FlowForce Server, run the following command:
This command copies the .tool file from /etc directory of StyleVision Server to the FlowForce Server /tools directory. The .tool file is required by FlowForce Server; it contains the path to the StyleVision Server executable. You do not need to run this command if you install FlowForce Server before installing StyleVision Server.
If you need to uninstall a previous version, do this as follows. On the Linux command line interface (CLI), you can check which Altova server products are installed with the following command:
[Debian, Ubuntu]: dpkg --list | grep Altova
[CentOS, RedHat]: rpm -qa | grep server
If StyleVision Server is not installed, go ahead with the installation as documented below in Installing StyleVision Server.
If StyleVision Server is installed and you wish to install a newer version of StyleVision Server, uninstall the old version with the command:
[Debian, Ubuntu]: sudo dpkg --remove stylevisionserver
[CentOS, RedHat]: sudo rpm -e stylevisionserver
If you need to uninstall an old version of Altova LicenseServer, do this with the following command:
[Debian, Ubuntu]: sudo dpkg --remove licenseserver
[CentOS, RedHat]: sudo rpm -e licenseserver
StyleVision Server installation packages for the following Linux systems are available at the Altova website.
After downloading the Linux package, copy it to any directory on the Linux system. Since you will need an Altova LicenseServer in order to run StyleVision Server, you may want to download LicenseServer from the Altova website at the same time as you download StyleVision Server, rather than download it at a later time.
In a terminal window, switch to the directory where you have copied the Linux package. For example, if you copied it to a user directory called MyAltova (that is located, say, in the /home/User directory), then switch to this directory as follows:
Install StyleVision Server with the following command:
[Debian]: sudo dpkg --install stylevisionserver-2019-debian.deb
[Ubuntu]: sudo dpkg --install stylevisionserver-2019-ubuntu.deb
[CentOS]: sudo rpm -ivh stylevisionserver-2019-1.x86_64.rpm
[RedHat]: sudo rpm -ivh stylevisionserver-2019-1.x86_64.rpm
The StyleVision Server package will be installed in the folder:
In order for any Altova Server product—including StyleVision Server—to run, that server product must be licensed via an Altova LicenseServer on your network.
On Linux systems, Altova LicenseServer will need to be installed separately. Download LicenseServer from the Altova website and copy the package to any directory on the Linux system. Install it just like you installed StyleVision Server (see previous step).
[Debian]: sudo dpkg --install licenseserver-3.2-debian.deb
[Ubuntu]: sudo dpkg --install licenseserver-3.2-ubuntu.deb
[CentOS]: sudo rpm -ivh licenseserver-3.2-1.x86_64.rpm
[RedHat]: sudo rpm -ivh licenseserver-3.2-1.x86_64.rpm
The LicenseServer package will be installed in:
For information about how to register StyleVision Server with Altova LicenseServer and license it, see the section, Licensing on Linux. Also see the LicenseServer documentation for more detailed information.
Current version: 3.2
© 2019 Altova GmbH