RaptorXML Server is available for installation on Linux systems. Its installation and setup procedure is described below.
If you are installing RaptorXML Server together with FlowForce Server, it is recommended that you install FlowForce Server first. Otherwise, after having installed both RaptorXML Server and FlowForce Server, run the following command:
This command copies the .tool file from /etc directory of RaptorXML Server to the FlowForce Server /tools directory. The .tool file is required by FlowForce Server; it contains the path to the RaptorXML Server executable. You do not need to run this command if you install FlowForce Server before installing RaptorXML Server.
You must have administrator (root) privileges to be able to install RaptorXML Server. Installation must be done, therefore, as the root user. If you are logged in as root, you can leave out the sudo keyword from the commands listed below.
If you need to uninstall a previous version, do this as follows. On the Linux command line interface (CLI), you can check which Altova server products are installed with the following command:
[Debian, Ubuntu]: dpkg --list | grep Altova
[CentOS, RedHat]: rpm -qa | grep server
If RaptorXML Server is not installed, go ahead with the installation as documented below in Installing RaptorXML Server.
If RaptorXML Server is installed and you wish to install a newer version of RaptorXML Server, uninstall the old version with the command:
[Debian, Ubuntu]: sudo dpkg --remove raptorxmlserver
[CentOS, RedHat]: sudo rpm -e raptorxmlserver
If you need to uninstall an old version of Altova LicenseServer, do this with the following command:
[Debian, Ubuntu]: sudo dpkg --remove licenseserver
[CentOS, RedHat]: sudo rpm -e licenseserver
RaptorXML Server installation packages for the following Linux systems are available at the Altova website.
After downloading the Linux package, copy it to any directory on the Linux system. Since you will need an Altova LicenseServer in order to run RaptorXML Server, you may want to download LicenseServer from the Altova website at the same time as you download RaptorXML Server, rather than download it at a later time.
In a terminal window, switch to the directory where you have copied the Linux package. For example, if you copied it to a user directory called MyAltova (that is located, say, in the /home/User directory), then switch to this directory as follows:
Install RaptorXML Server with the following command:
[Debian]: sudo dpkg --install raptorxmlserver-2019-debian.deb
[Ubuntu]: sudo dpkg --install raptorxmlserver-2019-ubuntu.deb
[CentOS]: sudo rpm -ivh raptorxmlserver-2019-1.x86_64.rpm
[RedHat]: sudo rpm -ivh raptorxmlserver-2019-1.x86_64.rpm
The RaptorXML Server package will be installed in the folder:
In order for any Altova Server product—including RaptorXML Server—to run, that server product must be licensed via an Altova LicenseServer on your network.
On Linux systems, Altova LicenseServer will need to be installed separately. Download LicenseServer from the Altova website and copy the package to any directory on the Linux system. Install it just like you installed RaptorXML Server (see previous step).
[Debian]: sudo dpkg --install licenseserver-3.2-debian.deb
[Ubuntu]: sudo dpkg --install licenseserver-3.2-ubuntu.deb
[CentOS]: sudo rpm -ivh licenseserver-3.2-1.x86_64.rpm
[RedHat]: sudo rpm -ivh licenseserver-3.2-1.x86_64.rpm
The LicenseServer package will be installed in:
For information about how to register RaptorXML Server with Altova LicenseServer and license it, see the section, Licensing on Linux. Also see the LicenseServer documentation for more detailed information.
Current version: 3.2
© 2019 Altova GmbH