The Web UI settings (screenshot below) specify network access settings for the Web UI (or Configuration page)
|•||Allowed IP addresses for the Web UI can be either: (i) all interfaces and IP addresses of that machine, or (ii) a fixed address.|
|•||Ports can be either dynamically calculated or fixed. This setting together with the IP address setting enables a wide range of allowed IP-Address:Port settings. The default port setting is 8088.|
The default settings allow unrestricted access to LicenseServer and its configuration page from within the networks to which LicenseServer is connected. If you wish to restrict the access that clients have to LicenseServer, enter the settings you want to allow and click Save.
Run a connectivity test to check that the settings are correct.
© 2019 Altova GmbH