Home. 
.

transparent

transparent

transparent

Altova Mailing List Archives


Re: validator disparity

From: Paul Warren <pdw@------------.--->
To: bud@---------.---
Date: 6/14/2007 4:43:00 PM
Hi Bud,

I should point out that our schema validation service is simply a web  =

frontend to the Xerces-J Schema Validator (this used to be made clear  =

on the web page, but it seems that notice has gone AWOL - I'll get  
that fixed).

A quick look at the schema spec suggests that Xerces is wrong on this  =

point:

"The - character is a valid character range only at the beginning or  
end of a =B7positive character group=B7."

regards,

Paul


On 14 Jun 2007, at 15:26, Bud Hovell wrote:

> Hi, folks ...
>
> I've run across a bit of a puzzle and thought I'd at least report  
> it for examination by others technically qualified.
>
> In the course of validating a test output file found at http:// 
> www.amexpat.com/primeloc.xml, I discovered both it and the schema  
> validate without complaint on the W2C validator at http:// 
> www.w3.org/2001/03/webdata/xsv, but the schema does not validate at  =

> http://tools.decisionsoft.com/schemaValidate/, which offers the  
> following complaint:
> ================== OUTPUT =
=====================
> XML Schema Validator
>
> Well Formed: VALID
> Schema Validation: INVALID
>
> The following errors were found:
> TYPELOCMESSAGE
> Validation 128, 38InvalidRegex: Pattern value '[-0-9]*' is not a  
> valid regular expression. The reported error was: ''-' is an  
> invalid character range. Write '\-'.'.
> Validation 134, 38InvalidRegex: Pattern value '[-0-9+ ()]*' is not  
> a valid regular expression. The reported error was: ''-' is an  
> invalid character range. Write '\-'.'.
>
> ================ END OUTPUT =
===============
>
> ... evidently because the non-range-denoting "-" character is shown  =

> in the first position of the pattern match in brackets rather than  
> last.  I'm not acquainted with the specific rules for schema  
> validation, but seem to recall that most regex matching rules DO  
> require a literal naked dash to be mentioned last.  In this case,  
> the parser evidently wants to see it backslashed so it is  
> understood to denote a literal rather than a range.
>
> This is the text of the two relevant blocks in the 2007-05-21  
> schema file (attached in full) which I received from the provider  
> and have input for testing at DecisionSoft:
>
>         <xsd:simpleType name="integerOrNull_Type">
>                 <xsd:restriction base="xsd:string">
>                         <xsd:pattern value="[-0-9]*"/>
>                 </xsd:restriction>
>         </xsd:simpleType>
>         <!-- Telephone can contains numbers, spaces, brackets, +'s  
> and -'s /-->
>         <xsd:simpleType name="telephoneNumber_Type">
>                 <xsd:restriction base="xsd:string">
>                         <xsd:pattern value="[-0-9+ ()]*"/>
>                 </xsd:restriction>
>         </xsd:simpleType>
>
> ... which shows no evidence of a backslash to protect the literal  
> dash.
>
> These two parsers offer conflicting results given identical input.   =

> While I'm agnostic as to which may be judged correct, they should  
> at least agree even if both are in error. :)
>
> I'm jointly addressing this to the W3C team and the folks over at  
> DecisionSoft in hope this disparity may be resolved.
>
> Best regards,
> -- Bud Hovell bud@s... http://www.syndafeed.com
> <?xml version="1.0" encoding="utf-8"?>
> <!-- edited with XMLSpy v2006 rel. 3 sp1 (http://www.altova.com) by  =

> Andy Dawkins (Primelocation) -->
> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
> 	<xsd:annotation>
> 		<xsd:documentation xml:lang="en">
>             PrimeLocation.com FastcropX1 data schema - Last Update  
> 2007-05-21
>         </xsd:documentation>
> 	</xsd:annotation>
> 	<xsd:element name="root" type="root_Type"/>
> 	<xsd:complexType name="root_Type">
> 		<xsd:sequence>
> 			<xsd:element name="agentGroup" =
type="agentGroup_Type"  
> minOccurs="0" maxOccurs="unbounded"/>
> 		</xsd:sequence>
> 	</xsd:complexType>
> 	<xsd:complexType name="agentGroup_Type">
> 		<xsd:sequence>
> 			<xsd:element name="mode" =
type="agentGroupMode_Type"  
> default="FULL"/>
> 			<xsd:element name="exportDate" =
type="xsd:dateTime" minOccurs="0"/>
> 			<!-- Not madatory but useful for debugging -->
> 			<xsd:element name="agentBranch" =
type="agentBranch_Type"  
> minOccurs="0" maxOccurs="unbounded"/>
> 		</xsd:sequence>
> 		<xsd:attribute name="code" type="xsd:string" =
use="required"/>
> 	</xsd:complexType>
> 	<xsd:complexType name="agentBranch_Type">
> 		<xsd:sequence>
> 			<xsd:element name="property" =
type="property_Type" minOccurs="0"  
> maxOccurs="unbounded"/>
> 		</xsd:sequence>
> 		<xsd:attribute name="code" type="xsd:string" =
use="required"/>
> 	</xsd:complexType>
> 	<xsd:complexType name="property_Type">
> 		<xsd:choice>
> 			<xsd:sequence>
> 				<!-- Property Address Details /-->
> 				<xsd:element name="fullPostCode" =
type="xsd:string"/>
> 				<xsd:element name="countryCode" =
type="countryCode_Type"  
> default="GB" minOccurs="0"/>
> 				<xsd:element name="name" =
type="xsd:string"/>
> 				<xsd:element name="address" =
type="xsd:string"/>
> 				<xsd:element name="regionCode" =
type="xsd:string" minOccurs="0"/>
> 				<!-- Property Description /-->
> 				<xsd:element name="summary" =
type="xsd:string" minOccurs="0"/>
> 				<xsd:element name="details" =
type="xsd:string" minOccurs="0"/>
> 				<!-- Property Price Information /-->
> 				<xsd:element name="pricePrefix" =
type="pricePrefix_Type"/>
> 				<xsd:element name="price" =
type="integerRange_Type"/>
> 				<xsd:element name="priceCurrency" =
type="priceCurrency_Type"  
> default="GBP" minOccurs="0"/>
> 				<!-- Property sale specifics /-->
> 				<xsd:element name="sellingState" =
type="sellingState_Type"/>
> 				<xsd:element name="propertyType" =
type="propertyType_Type"/>
> 				<xsd:element name="newHome" =
type="xsd:string" minOccurs="0"/>
> 				<xsd:element name="saleOrRent" =
type="saleOrRent_Type"/>
> 				<xsd:element name="sharedCommission" =
type="xsd:string"  
> minOccurs="0"/>
> 				<!-- Rental Information /-->
> 				<xsd:element name="groundRent" =
type="xsd:decimal" minOccurs="0"/>
> 				<!-- Value in GBP per annum /-->
> 				<xsd:element name="serviceCharge" =
type="xsd:decimal"  
> minOccurs="0"/>
> 				<!-- Value in GBP per annum /-->
> 				<xsd:element name="furnished" =
type="xsd:boolean" minOccurs="0"/>
> 				<xsd:element name="rentalLength" =
type="xsd:int" minOccurs="0"/>
> 				<!-- Tenure Information /-->
> 				<xsd:element name="tenure" =
type="tenure_Type" default=""  
> minOccurs="0"/>
> 				<xsd:element =
name="leaseholdYearsRemaining"  
> type="integerOrNull_Type" minOccurs="0"/>
> 				<!-- Property Room Information /-->
> 				<xsd:element name="bedrooms" =
type="integerRange_Type"/>
> 				<xsd:element name="bathrooms" =
type="integerRange_Type"/>
> 				<xsd:element name="receptionRooms" =
type="integerRange_Type"/>
> 				<!-- Property Images, Supported types: =
JPG, PNG, GIF /-->
> 				<xsd:element name="mainImage" =
type="asset_Type" minOccurs="0"/>
> 				<!-- The file name of the image /-->
> 				<xsd:element name="additionalImage1" =
type="asset_Type"  
> minOccurs="0"/>
> 				<xsd:element name="additionalImage2" =
type="asset_Type"  
> minOccurs="0"/>
> 				<xsd:element name="additionalImage3" =
type="asset_Type"  
> minOccurs="0"/>
> 				<xsd:element name="additionalImage4" =
type="asset_Type"  
> minOccurs="0"/>
> 				<!-- Floorplans, Up to four images ( =
JPG, PNG, GIF ) OR a  
> single PDF /-->
> 				<xsd:element name="floorPlan1" =
type="asset_Type" minOccurs="0"/>
> 				<!-- The file name of the image /-->
> 				<xsd:element name="floorPlan2" =
type="asset_Type" minOccurs="0"/>
> 				<xsd:element name="floorPlan3" =
type="asset_Type" minOccurs="0"/>
> 				<xsd:element name="floorPlan4" =
type="asset_Type" minOccurs="0"/>
> 				<!-- Brochure, A single PDF /-->
> 				<xsd:element name="brochure" =
type="asset_Type" minOccurs="0"/>
> 				<!-- The file name of the pdf /-->
> 				<!-- Virtual Tour -->
> 				<xsd:element name="vTourURL" =
type="xsd:string" minOccurs="0"/>
> 				<!-- URL to a virtual Tour -->
> 				<!-- Virtual Tour -->
> 				<xsd:element name="vTour2URL" =
type="xsd:string" minOccurs="0"/>
> 				<!-- URL to a virtual Tour -->
> 				<!-- HIP Document -->
> 				<xsd:element name="HIPDocument" =
type="asset_Type" minOccurs="0"/>
> 				<!-- Filename or URL to an HIP Document =
-->
> 				<!-- EPC Document -->
> 				<xsd:element name="EPCDocument" =
type="asset_Type" minOccurs="0"/>
> 				<!-- Filename or URL to an EPC Document =
-->
> 				<!-- Energy Efficiency Ratings -->
> 				<xsd:element name="EERImage" =
type="asset_Type" minOccurs="0"/>
> 				<xsd:element name="EERCurrent" =
type="xsd:integer" minOccurs="0"/>
> 				<xsd:element name="EERPotential" =
type="xsd:integer"  
> minOccurs="0"/>
> 				<!-- Environment Impact Ratings -->
> 				<xsd:element name="EIRImage" =
type="asset_Type" minOccurs="0"/>
> 				<xsd:element name="EIRCurrent" =
type="xsd:integer" minOccurs="0"/>
> 				<xsd:element name="EIRPotential" =
type="xsd:integer"  
> minOccurs="0"/>
> 				<!-- Optional Contact Information. If =
provided will be used  
> instead of contact information of the agent branch -->
> 				<xsd:element name="contactName" =
type="xsd:string" minOccurs="0"/>
> 				<xsd:element name="contactTelephone"  =

> type="telephoneNumber_Type" minOccurs="0"/>
> 				<xsd:element name="contactEmail" =
type="xsd:string" minOccurs="0"/>
> 				<!-- Additional Record Information /-->
> 				<xsd:element name="createdDate" =
type="xsd:dateTime"  
> minOccurs="0"/>
> 				<xsd:element name="modifiedDate" =
type="xsd:dateTime"  
> minOccurs="0"/>
> 				<xsd:element name="additionalKeywords" =
type="xsd:string"  
> minOccurs="0"/>
> 				<xsd:element name="notes" =
type="xsd:string" minOccurs="0"/>
> 			</xsd:sequence>
> 			<xsd:sequence>
> 				<xsd:element name="delete" =
type="xsd:string" default="1"  
> minOccurs="0"/>
> 			</xsd:sequence>
> 		</xsd:choice>
> 		<xsd:attribute name="propertyID" type="xsd:string" =
use="required"/>
> 	</xsd:complexType>
> 	<xsd:complexType name="asset_Type">
> 		<xsd:simpleContent>
> 			<xsd:extension base="xsd:string">
> 				<xsd:attribute name="modifiedDate" =
type="xsd:dateTime"  
> use="optional"/>
> 			</xsd:extension>
> 		</xsd:simpleContent>
> 	</xsd:complexType>
> 	<!-- countryCode is always 2 alpha characters /-->
> 	<xsd:simpleType name="countryCode_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:pattern value="[A-Za-z]{2}"/>
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- priceCurrency is always 3 alpha characters /-->
> 	<xsd:simpleType name="priceCurrency_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:pattern value="[A-Za-z]{3}"/>
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- price,bedrooms,bathrooms, etc
>          can be a string representation of an integer
>          or an integer range of two integers seperated by ' TO ' or  =

> ' - ' /-->
> 	<xsd:simpleType name="integerRange_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:pattern value="([0-9]* ?(TO|-) =
?[0-9]*|[0-9]*)"/>
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<xsd:simpleType name="integerOrNull_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:pattern value="[-0-9]*"/>
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- Telephone can contains numbers, spaces, brackets, +'s and  =

> -'s /-->
> 	<xsd:simpleType name="telephoneNumber_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:pattern value="[-0-9+ ()]*"/>
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- agentGroupMode has a set list of possible values /-->
> 	<xsd:simpleType name="agentGroupMode_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:enumeration value="FULL"/>
> 			<xsd:enumeration value="INCR"/>
> 			<!-- Full /-->
> 			<!-- Incremental /-->
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- pricePrefix has a set list of possible values /-->
> 	<xsd:simpleType name="pricePrefix_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:enumeration value="F"/>
> 			<xsd:enumeration value="I"/>
> 			<xsd:enumeration value="O"/>
> 			<xsd:enumeration value="A"/>
> 			<xsd:enumeration value="S"/>
> 			<xsd:enumeration value="R"/>
> 			<xsd:enumeration value="B"/>
> 			<xsd:enumeration value="G"/>
> 			<xsd:enumeration value="P"/>
> 			<xsd:enumeration value="W"/>
> 			<xsd:enumeration value="M"/>
> 			<xsd:enumeration value="N"/>
> 			<!-- Asking price of /-->
> 			<!-- Offers in the region of /-->
> 			<!-- Offers in excess of /-->
> 			<!-- Auction guild price of /-->
> 			<!-- Subject to contract /-->
> 			<!-- Price range of /-->
> 			<!-- Prices from /-->
> 			<!-- Guide price /-->
> 			<!-- Price on Application /-->
> 			<!-- Weekly rental of /-->
> 			<!-- Monthly rental of /-->
> 			<!-- Annual rental of /-->
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- sellingState has a set list of possible values /-->
> 	<xsd:simpleType name="sellingState_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:enumeration value="V"/>
> 			<xsd:enumeration value="U"/>
> 			<xsd:enumeration value="H"/>
> 			<xsd:enumeration value="N"/>
> 			<xsd:enumeration value="S"/>
> 			<xsd:enumeration value="L"/>
> 			<!-- Viewing /-->
> 			<!-- Under offer /-->
> 			<!-- Hidden /-->
> 			<!-- New Instruction /-->
> 			<!-- Sold /-->
> 			<!-- Let /-->
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- propertyType has a set list of possible values /-->
> 	<xsd:simpleType name="propertyType_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:enumeration value="H"/>
> 			<xsd:enumeration value="F"/>
> 			<xsd:enumeration value="A"/>
> 			<!-- House /-->
> 			<!-- Flat /-->
> 			<!-- Agricultural  /-->
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- saleOrRent has a set list of possible values /-->
> 	<xsd:simpleType name="saleOrRent_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:enumeration value="S"/>
> 			<xsd:enumeration value="R"/>
> 			<!-- Sale /-->
> 			<!-- Rent /-->
> 		</xsd:restriction>
> 	</xsd:simpleType>
> 	<!-- tenure has a set list of possible values /-->
> 	<xsd:simpleType name="tenure_Type">
> 		<xsd:restriction base="xsd:string">
> 			<xsd:enumeration value="F"/>
> 			<xsd:enumeration value="S"/>
> 			<xsd:enumeration value="L"/>
> 			<xsd:enumeration value="X"/>
> 			<xsd:enumeration value=""/>
> 			<!-- Freehold /-->
> 			<!-- Share of freehold /-->
> 			<!-- Leasehold /-->
> 			<!-- Not Specified /-->
> 			<!-- Not Specified /-->
> 		</xsd:restriction>
> 	</xsd:simpleType>
> </xsd:schema>

-- 
CTO, DecisionSoft Limited
+44 1865 203192 / +44 7968 408138



From mike@s... Thu Jun 14 


transparent
Print
Mail
Like It
Disclaimer
.

These Archives are provided for informational purposes only and have been generated directly from the Altova mailing list archive system and are comprised of the lists set forth on www.altova.com/list/index.html. Therefore, Altova does not warrant or guarantee the accuracy, reliability, completeness, usefulness, non-infringement of intellectual property rights, or quality of any content on the Altova Mailing List Archive(s), regardless of who originates that content. You expressly understand and agree that you bear all risks associated with using or relying on that content. Altova will not be liable or responsible in any way for any content posted including, but not limited to, any errors or omissions in content, or for any losses or damage of any kind incurred as a result of the use of or reliance on any content. This disclaimer and limitation on liability is in addition to the disclaimers and limitations contained in the Website Terms of Use and elsewhere on the site.

.
.

transparent

transparent