Download Latest Petroleum / Chemical / Plant Engineering / CAD CAM CFD
FEA Engineering Software

Let's put an end to your rigorous search for softwarePS, sending money
and getting cheated, paying for evaluation versions in the name of full
versions etc.. You can get almost all full working versions under one
roof.

>You need any type of CAD CAM CAE CFD FEA EDA PCB GIS CNC or any other
type of software....SoftwarePS can provide you ..
:You need software at low cost... contact 'SoftwarePS'
:You need fully working and professional version of engineering
software...'SoftwarePS' is the right choice
:You are searching for trustable and real crack software sellers....
'SoftwarePS' is the right choice.
:You need to have the copy of software available if you lost your
copy....'SoftwarePS' will provide you
:You need not to spend valuable money on shipment...'SoftwarePS'
provides high speed HTTP downloading without any cost
:You need not to pay high transaction amount for sending
money....'SoftwarePS' is the right choice.


New Software:
===========
Below new software added.. 

ASPENONE ASPEN ENGINNERING Suite v2006 - 6 CDs 
SCANDPOWER PETROLEUM TECHNOLOGY OLGA v5.2.1 - 1CD 
DYADEM PHA Pro v6.0 - 1CD
**** Hazard Analysis Software ****
SUNRISE SYSTEM PIPENET Vision v1.12 - 1CD
[Spray/Sprinkler v4.01, Standard v4.01, Transient v6.02]
**** Steady/Tranient Fluid Flow Analysis of Pipe, Duct and Sprinkler
Networks **** 
SolidCAM v2007 R11.1 - 1CD
Primavera Expedition v10.1 - 2CDs
Sescoi-Worknc v17.03 - 1CD
UGS NX  5.0.25 - 1DVD
CSI SAP2000 V11.0 - 1CD
IMOLD2006 for solidworkS - 1CD
Haliburton Landmark (DSS) v2003.14 - 1CD
BENTLEY AUTOPIPE XM v8.0.9.00.14 - 2006 ed - 1CD 
**** Piping Stress Analysis Software ****
Zeataline PipeSupport-Pro v3.1 - 1CD
Zeataline PipeData-PRO 7.2 - 1CD
COADE CAESAR II v5.00.6 - 1CD
COADE PVElite v2006 - 1CD
Electronic Corrosion Engineer v4.0 - 1CD
**** Corrosion Rate Predictor, Risk Prediction, Corrosion Resistant
Alloy Evaluator and Life Cycle Cost Calculator of Flow Lines and Tubing
**** 
http://www.xs4all.nl/~cdewaard/ECE.html
HTC ACX and STX v3.5.65 - 1CD
Tahoe Pumpbase v2.0c - 1CD
DYADEM FMEA-Pro v6.0 - 1CD
**** Failure Mode and Effects Analysis software solution *****
IHS Energy Pipesoft-2 v6.5 - 1CD ...[for this software you have to
contact me after every 2 months to get new serial keys.]
**** steady-state flow simulator for single or multiphase fluid systems
**** 
IHS Energy Gas Lift v2.0 - 1CD
IHS Energy OilWAT - GasWat v10.10 - 1CD
**** Comprehensive material balance analysis (conventional and
generalized) **** 
IHS Energy PVTlib v5.01 - 1CD
**** Black oil/compositional properties, over 140 correlations **** 
IHS Energy Raptor v3.4 - 1CD
**** Fast well test analysis ****
IHS Energy Vol Oil - Vol Gas v2.01 - 1CD
**** Volumetrics, Monte Carlo and estimated recoveries ****
IHS Energy Subpumpv8.0 - 1CD
**** Electric submersible pump design and analysis ****
IHS Energy Perform v6.0 - 1CD
**** NODAL® analysis, well/flowline optimization *****
TEKLA Structures v13 - 1CD 
PROTEUS ENGINEERING FASTSHIP V6.1.29 - 1CD
PROTEUS ENGINEERING MAESTRO V8.7.6 - 1CD
DNV PHAST and SAFETI v6.5 - 1CD
**** Hazard analysis software *****
INFOCHEM MULTIFLASH v3.5 - 1CD
Abaqus v6.7 Win32 - 2CDs
CALSEP PVTSIM v16 - 1CD

ASPENONE ASPEN Flarenet v2006 (with Manuals) - 1CD 
ASPENONE ASPEN HYSYS v2006 ( with manuals) – 1CD 
Pipenet v1.10 (with manuals) - 1CD  
[ Spray v4.00 - Standard v4.00 - Transient v6.00]
Earth Desiciin Suite (Gocad ) V2.1.2 
IHS Energy Perform 6.0  – 1 CD
ASPENONE ASPEN HTFS v2006 – 1CD
CALSEP PVTSim v16.0 - 1CD 
COADE PVElite v2006 - 1CD
COADE CAESAR II v5.0 - 1CD
DNV PHAST 6.51 - 1CD 
REIUSA STAAD PRO v2006
UNIDO Comfar III Expert V 3.0
Rockware Rockworks 2006 v6.6.30
E-Ware ETank2000 V1.5.400
SCHLUMBERGER Drilling Office 3.1
Kappaeng Emeraude v2.42
Kappaeng Topaze v1.0
Kappaeng K-Prospect v1.0
Kappaeng Diamant v1.10
Kappaeng Saphir v3.20
Kappaeng Ecrin v.4.0
Merak Value and Risk Suite 3.0 - 1CD
Romar Irap RMP V7.5
SCHLUMBERGER PETREL V2005
Tekla Structures v12.0 - 1 CD (with platenesting module)
Genstat v9.1.147 - 1CD
SIMSCI PRO/II v8.0 - 1CD
Actel Designer v7.2 SPA - 1CD 
ITTVIS ENVI v4.3 - 1CD
HTRI Xchanger Suite v5.0 - 1CD
{Xace ® , Xfh ® , Xhpe™ , Xist ® , Xjpe™ , Xphe ® , Xspe™, Xtlo ® , and
Xvib ®]
Fledermaus Pro v6.3 - 1CD
Plaxis 3D Foundation v1.1 SP3 - 1CD 
PLAXIS 3D TUNNEL v1.2 - 1CD
Prosteel 3D v17 for autocad2004-2006 - 1CD
Sclumberger ECLIPSE v2006.1 - 1CD
ASPENONE ASPEN HTFS and HTFS+ v2004.2 (with manuals) - 1CD
UGS Solid Edge v19.0 - 1DVD
Schlumberger PIPESIM v2006.1 - 1CD 
[PF, WDP, NA, GOAL, FRPT, PVT and HOSIM]
Articad Kitchen Designer v7.07 - 1CD 
PENG ENGINEERING SIMFLEX II v7.0 - 1CD
*** Piping Stress Analysis Software **** 
SDRC I-DEAS NX12 M2 - 1DVD 
ASPENONE ASPEN HYSYS v2004.2 (with manuals) - 1CD
SHELL RESEARCH LIMITED - SHELL SHEPHERD Software - 1CD 
[Shell Fred v4.0 and Shell Shepherd Desktop v1.1] 
**** Fire, Release, Explosion, Dispersion and Hazard consequence
modelling package *** 
SHOECAM v4.2 - 1CD
ACECAD STRUCAD v11.0 - 1CD
Pipeline studio v2.1 - 1CD
Virtual Materilas Group VMGSIM v2.5.1 - 1CD
*** Steady State Process Simulator ***
EPS (Dynalift) Last version 
EPS (PanSys) Last version 
EPS (Pan Scan) Last version  
EPS (Math bal) Last version 
EPS (Math bal) Last version 
EPS (Well flow) Last version 
EPS (Field flow) Last version 
Schlumberger Eclipse v2006 - 1CD 
Schlumberger Eclipse v2005A - 1CD 
Petroleum Experts IPM v5.2 - 1CD
[GAP v6.2, MBAL v8.2, PROSPER v9.2, PVTP v7.2, RESOLVE v2.2, and REVEAL
v2.2]
CMG 2006 – 1CD 
Pipe Flow Advisor v1.0 - 1CD
Pipe Flow Wizard v1.07 - 1CD 
StruCalc v7.01.05 - 1CD
Nemetschek Allplan v2006.1 - 1CD
Midas Civil v20060412 - 1CD 
Rocscience Phase2 v6014 - 1CD
SCHLUMBERGER PETREL v2005 - 1CD
DLUBAL RFEM v2.01.643 - 1CD
EMRC NISA CIVIL v14 - 1CD
ROXAR IRAM RMS v7.5 - 1CD 
Z_soil2D v6.13 - 1CD
SCANDPOWER PETROLEUM TECHNOLOGY OLGA v5.0.2 - 1CD 
*** World's Best Multiphase Flow Simulator ***
FLEXISIGN PRO 7.6 v2 - 2CDs
Dassault Systemes Catia P3 v5r16 P3 - 4CDs
HKS ABAQUS v6.6.1 - 3CDs
HKS ABAQUS v6.6.1 Documentation – 1CD
IAFES FOUNDATION v2.5 – 1CD
CAMBRIDGESOFT BioOffice Ultra v2006 – 1CD
CAMBRIDGESOFT ChemOffice Ultra v2006 – 1CD
PTC Pro Engineer Wildfire v3.0 M020 x64 – 2CDs
PTC Pro Engineer Wildfire v3.0 M020 Linux – 2CDs
PTC Pro Engineer Wildfire v3.0 M020 – 3CDs
MIN SAP 6.2 - 3CDs
CEi EnSight v8.07 - 1 DVD 
CITECT SCADA v6.10 - 1CD
Mathcad Enterprise Edition v13.1- 1CD 
DIMSOLN DSANCHOR v2.6.1 - 1CD
PRIMAVERA v5(Primavera Project Planner P3) - 1CD 
ABAQUS for CATIA v5R16 v2.2 - 1CD
ENGINEERING DYNAMICS SACS v5.2 - 1CD
ETAP PowerStation v5.0.3 (with manuals) - 1CD
Primavera P3e-c v5.0 - 3CDs
AVL SWIFT v3.1.1 - 1CD 
AVL FIRE v8.31 - 1CD
AVL WorkSpace SUITE v4.0 -1CD
[AUTOSHAFT v1.0, AVL Excite v6.0.1, AVL Tyconv5.1.1, AVL Glide v4.4.1,
AVL Bricks v3.2.1, AVL Hydsim v4.3.1, AVL Boost v4.0.3, AVL TNG v1.0 and
AVL Impress v1.2]
Altera Quartus II v6.0 - 2CDs
Autodesk MAP 3D v2007 - 2CDs
Autodesk VIZ v2007 - 2CDs 
Autodesk Civil Design v2007- 1CD 
Autodesk AutoCAD Mechanical v2007 - 1CD
Autodesk Land Desktop v2007 - 4CDs
Autodesk AutoCAD LT v2007 - 1CD
Autodesk AutoCAD Electrical v2007- 1DVD
Autodesk Inventor Professional v11- 5CDs
Autodesk Survey v2007- 1CD
Autodesk MAP 3D v2007 - 2CDs 
Delcam Powermill PM6008 CB1071050 SP7a - 1CD 
ProCAD 2D Designer v2004 2 Datecode 2006 05 - 1CD 
BENTLEY / REBIS WinNozl v03.00.00.07 - 1CD 
ARRIS v9.0.112 - 1CD 
PTC Pro Engineer Wildfire v3.0 M010 (3CD+X64 3CD+Linux 2CD)
IMS Design CAD 3DMax v16.2 - 1CD 
INUS Technology RapidForm v2006 - 1CD 
Rhinoceros 3D v3.0 SR5 - 1CD
DNV PHAST 6.0 - 1CD
*** Process Hazard Analysis Software Tool *** 
COADE CADWORKX DATASHEETS BUILD FEB 2006 - 1CD
CAODE Cadworx Pipe v2004 - 1CD 
CSC FASTRAK v12.0 - 1CD 
CSC TEDDS v9.0 - 1CD
Intergraph Intools v6.0 - 1CD
*** Instrumentation Design Software *** 
IdeCAD Architectural IDS v5.14 - 1CD 
IdeCAD Structural IDS v5.14 - 1CD
REIWORLD STAAD Beam v1.2 – 1CD
CNC Machinist ToolBox v8.1.0 - 1CD
MSC MARC v2005 R3 - 1CD 
Airplan v8.5.3 - 1CD
Ashlar Vellum Graphite v7.6.2 - 1CD
Beacon Designer v5.1 - 1CD
CCDC GOLD v3.0.1 AIX - 1CD
CoDeveloper Universal v2.10 E.20 - 1CD
Delcam Powermill PM6008 CB1071048 SP6 - 1CD
Engenious Systems Inc StormShed2G.v7.0.0.13 - 1CD
GAEA POLLUTE v7.063 - 1CD
GAEA WINFENCE v2.13 - 1CD
GAEA WINLOG v4.37 - 1CD
Gproms Modelbuilder v2.3.4 - 1CD
Gridgen v15.09.R2 - 1CD
Identify AppSight v5.72 - 1CD
Impulse CoDeveloper Universal v2.10.E.15 - 1CD
MINITAB v14.20 - 1CD
Molsoft ICM-Pro v3.4-6c - 1CD
Parasoft SOA Test v4.5 - 1CD
SAM-LEAP5 v5.10D - 1CD
SAM-LEAP CLASSIC v6.2.4 - 1CD
Shade v8.5.1 Vitrea 2 v3.7 - 1CD
MSC SUPERFORGE v2005 MP1 - 1CD
CST Studio Suite v2006 - 1 DVD
CYME CYMCAP v4.2.R3 - 1CD
CYME CYMDIST v4.1.R21 - 1CD
CYME CYMGRD v6.3.R3 - 1CD
CYME CYMTCC v4.4.R8 - 1CD
CYME PSAF v2.81 R2.9 - 1CD
OPENMIND hyperCAD 2005.1_8.12.2005 Multilanguage - 1CD
OPENMIND HyperMILL v9.0 Include SP4 HF 29087 Multilanguage - 1CD
FORMSYS MAXSURF v11.11 - 1CD
EPCON Engineers Aide Toolbox v7.0 - 1CD 
EPCON API Technical Databook v7.0 - 1CD 
EPCON AIDE SiNET v7.0 - 1CD
*** Pipeline Network Analysis and Process Equipment Sizing and
Troubleshooting Software *** 
EPCON SYSTEM Process Explorer v7.0 - 1CD
*** Process Simulation Software *** 
Epcon Chempro Engineering Suite 6.31 - 1CD
[APITech Database v3.0, Chempro v6.31, Epcon Environ v2.0 and Epcon
SINET v6.11]
Epcon Environ v2.0 - 1CD
*** Enviornment, Health and Safety Analysis Software ***
BricsCad Architecturals v4.1.0027 for AutoCAD - 1CD
BricsCad Architecturals v4.1.0027 for BricsCad - 1CD
BricsCad Pro v6.2.0024 BricsCad Structural Frames v2.1.0004 - 1CD
SolidCAM 2006 R10 SP9 for SolidWorks - 1CD
UGS TECNOMATIX EM-POWER v7.5 - 1CD
PTC Expert Moldbase Extension v5.0 - 2CDs 
PTC Progressive Die v2.2 - 1CD
HYDROFLO v1.2 - 1CD 

------------------------------------------------------------------------
---------------------------------------------

 ABSOFT Fortran 8.0 – 1 CD
 ACCELRYS Materials Studio v3.2 – 1CD 
 ACECAD StruCAD v10.1 - 1CD 
 ACTEL Designer v6.2 - 1CD 
 ACTIFY SPINFIRE Complete Pro v2004 - 1CD 
 ADAPCO STARCD v3.2 - 1CD (For Linux) 
 ADAPCO STARCD v3.22 - 1CD (For Windows NT) 
 ADAPTSOFT Adapt Builder v1.54 - 1CD 
 ADAPTSOFT Adapt PT v7.1– 1CD 
 ADAPTSOFT ADAPT BUILDER EX BUILD 3 - 1CD 
 ADAPTSOFT ADAPT PT v7.10.3 - 1CD 
 ADINA SYSTEM v8.1 - 1CD 
 AEA TECHNOLOGY HYPROTECH Distil v5.0 - 1CD 
 AGILENT Vee Pro v7.5 - 1CD 
 AGILENT Advanced Design System (ADS) v2004A - 2CDs 
 Air Humid Handling v2004 - 1CD 
 ALGOR FEA v16 - 1CD 
 ALGOR Designcheck v19.1- 1CD 
 ALIAS Studio Tools v12.0 - 2CD 
 ALIAS I-Tools v3.5 – 1CD 
 ALIAS Maya v7.0 Unlimited - 4CDs 
 ALIAS MotionBuilder v7.0 – 1CD + 1DVD 
 ALIAS PIPING SOLUTIONS I-Run v3.44 – 1CD 
 ALIAS PIPING SOLUTIONS I-View v2.40 – 1CD 
 ALIAS I-Sketch v2.5.1.2 – 1CD 
 ALIAS Spoolgen v5.0.1.6 – 1CD 
 Alias ImageStudio v3.0 - 1CD 
 Alias Portfoliowall v3.0 - 1CD 
 Alldata v8.0 Install CD – 1CD 
 Alldata v8.0 Audi CD – 1CD 
 Alldata v8.0 Volvo CD Set – 4CDs 
 Alldata v2004 GM DVDs – 4DVDs + 1CD 
 Altera Quartus II v5.1 - 1CD 
 ALTURION GPS Professional v6.0 - 2CD 
 ALTAIR Hyperworks v7.0 - 1CD 
 ALTAIR Hyperworks v7.0 Service Pack 1 Update - 1CD 
 ALTIUM DXP Suite v2004 SP2 – 1CD 
 ANSOFT Simplore v6.0 - 2CDs 
 ANSOFT ePhysics - 1CD 
 ANSOFT Maxwell EM v10 - 1CD 
 ANSOFT HFSS v10.0 - 1CD
*** Software for Electromagnetic Simulation of High-Frequency and
High-Speed Components *** 
 ANSYS DESIGNSPACE v10.0 - 1CD 
 ANSYS Multiphysics 10.0 - 3CDs (Win/Linux/LinuxIA64) 
 ANSYS WorkBench Suite v10.0 - 2CDs (Win/Linux)
 ANSYS MULTIPHYSICS v10.0 with Service Pack 1 – 1CD 
 ANSYS WORKBENCH v10.0 with Service Pack 1 - 1CD 
 ANSYS ICEM CFD v10.0 – 3CDs (Win/LinuxIA64/LinuxAMD64) 
 ANSYS CFX v10.0 – 4CDs (Win/Linux/LinuxIA64/LinuxAMD64) 
 ANSYS Turbogrid v10.0 – 2CD (Win/Linux) [Need ANSYS WorkBench Suite
v10.0] 
 ANSYS Blademodeler v10.0 - 1CD 
 ANSYS Heal v8.1 - 1CD 
 ANSYS Paramesh v3.0 - 1CD 
 ANSYS CFX RIF v1.4.1 - 1CD 
 ANSYS CFX Tascflow v2.12.2 (NT/XP) - 2CD (CD1: For NT CD2: For XP
Professional) 
 ANSYS CFX Bladegen Plus v4.1.10 - 1CD 
 APPLIED FLOW TECHNOLOGY Mercury v5.5.2005.02.03 - 1CD 
 APPLIED FLOW TECHNOLOGY Impulse v3.0.2005.02.03 - 1CD 
 APPLIED FLOW TECHNOLOGY Fathom v6.0.2005.02.03 - 1CD 
 APPLIED FLOW TECHNOLOGY Arrow v3.0.2005.02.09 - 1CD 
 APPLIED FLOW TECHNOLOGY Titan v3.0.2005.02.02 - 1CD 
 ASPEN ICARUS Products v12.0 - 1CD 
 ASPENONE ASPEN ENGINNERING Suite v2004 - 6 CDs 
   [Aspen ACOL™, Aspen Adsim®, Aspen Aerotran®, Aspen APLE™, Aspen
AssetBuilder™, Aspen Batch Plus®, Aspen BatchCAD™, Aspen CatRef®, Aspen
Chromatography®, Aspen COMThermo®, Aspen Custom Modeler®, Aspen DISTIL™,
Aspen Dynamics®,Aspen FCC®, Aspen FIHR™, Aspen FLARENET™, Aspen FRAN™,
Aspen Hetran®, Aspen HTFS Research Network™, Aspen HX-Net®, Aspen
Hydrocracker®, Aspen Hydrotreater™, Aspen HYSYS®, Aspen Icarus Process
Evaluator™, Aspen Icarus Project Manager™, Aspen MUSE™, Aspen PIPE™,
Aspen OLI Interface™, Aspen Plus®, Aspen Polymers Plus®, Aspen Process
Manual™,Aspen Process Tools™, Aspen ProFES® , Aspen Properties®, Aspen
RefSYS™, Aspen Richardson Rbooks™, Aspen Richardson WinRace Database™,
Aspen Split™, Aspen TASC™, Aspen Teams®, Aspen TICP™, Aspen Zyqad™] 
 Aspen Engineering Suite v12.1 - 3CDs 
 ASPENTECH HTFS v2004 (with manuals) – 1CD 
   [ Aspen ACOL™, Aspen FIHR™, Aspen APLE™, Aspen MUSE™, Aspen PIPE™,
Aspen TASC™] 
 ASPENONE ASPEN HYSYS v2004 (with Manuals)– 1CD 
 ASPENONE ASPEN PLUS v2004 (with Manuals) - 1CD 
 ASPENONE B-Jac 2004 - 1CD 
 ASPENONE ASPEN DISTIL, HX-NET and SPLIT 2004 (with Manuals) - 1CD 
 ASPENONE ASPEN Flarenet v2004 (with Manuals) - 1CD 
 ASPENTECH ASPEN PIMS v2004 – 1CD
 ASPENONE ASPEN ICARUS v2004 (with manuals) - 1CD
 ATLAST SOFTWARE Sketchup.v5.0.232 - 1CD 
 ATIR STRAP v12.0 - 1CD
 AUTODATA v5.5.0.0 Multilanguage – 2CDs 
 AUTODESK AUTOCAD v2007 - 2CDs
 AUTODESK AutoCAD 2006 Spanish - 1CD 
 AUTODESK AutoCAD 2006 Italian - 1CD 
 AUTODESK Building System 2006 – 1DVD 
 AUTODESK Revit Building v8.1 - 1CD 
 AUTODESK Inventor Series 10.0 - 1 DVD 
 AUTODESK Inventor v8.0 Professional Spanish - 2CDs 
 AUTODESK Inventor Professional 10.0 – 1DVD or 6 CDs 
 AUTODESK Inventor v9.0 Design Accelerator Preview – 1CD 
 AUTODESK AutoCAD LT 2005 - 1CD 
 AUTODESK AutoCAD Mechanical 2006 - 1CD 
 AUTODESK AutoCAD Electrical 2006 - 1CD 
 AUTODESK Vault v4.0 - 1CD 
 AUTODESK Map3D 2006 - 3CDs 
 AUTODESK Map 2004 - 1CD 
 AUTODESK Architectural Desktop 2006 - 3CDs 
 AUTODESK Architectural Desktop 2005 – 1DVD (Spanish) 
 AUTODESK Architectural Desktop 2004 Spanish - 2CDs 
 AUTODESK Mechanical Desktop 2006 - 1CD 
 AUTODESK Revit Series v7.0 - 1CD
 AUTODESK REVIT STRUCTURE v2.0 - 1CD
 AUTODESK Land Desktop 2006 - 2CDs 
 AUTODESK VIZ 2006 - 2CDs 
 AUTODESK Raster Design 2006 - 1CD 
 AUTODESK Civil Design 2005 - 1CD 
 AUTODESK Civil3D 2006 - 2CDs 
 AUTODESK Civil Design Companion v2006 - 1CD 
 AUTODESK Survey 2006 - 1CD 
 AUTODESK Onsite Enterprise v2.5 - 1CD 
 AUTODESK TOXIK 1.0 - 1DVD 
 AUTODESK LUSTRE v2.6 – 1CD 
 AUTOMATION Studio Pro Edition V5.0 - 1CD 
 AUTOMATIONWORX Software Suite v2004.25 Multilingual – 1CD 
 AutoPOL for Windows v1.14 – 1CD 
 AUCOTEC Elcad Aucoplan v7.3 Multilanguage – 1CD 
 AVID METASYNC v22.1 – 1CD 
 AVID SOFTIMAGE XSI v4.2 – 2CDs 
 AVID SOFTIMAGE XSI v4.2 Behavior Quickstart – 1DVD 
 AVID XPRESS Pro HD v5.0.4 – 1CD 
 AVL FIRE v8.31 – 1CD 

 BENTLEY AutoPIPE Plus 2004 Edition v08.05.01.11 – 1CD
*** Piping Stress Analysis Software *** 
 BENTLEY AutoPLANT Plant Design 2004 Edition v8.05.00.32 – 1CD 
 BENTLEY AutoPLANT Structural 2004 Edition v8.06.00.11 - 1CD 
 BENTLEY Building Electrical System v8.05.03.10 
 BENTLEY Stuctural v8.05.03.62 – 1CD 
 BENTLEY Microstation Triforma v8.1 - 1CD 
 BENTLEY Microstation v8.05.02.35 - 1CD (2005 Edition) 
 BENTLEY Architecture v8.1 .1CD 
 BENTLEY Explorer 2004 Edition v8.5 - 1CD 
 BENTLEY InRoads Suite 2004 Edition v8.05 - 1CD 
 BENTLEY IRASB 2004 Edition v8.05 - 1CD 
 BENTLEY Architecture v8.05.02.13 - 1CD (2005 Edition) 
 BENTLEY MicroStation GeoGraphics v8.05.02.11 – 1CD 
 BENTLEY GEOPAK Civil Engineering Suite v8.05.02.35 – 1CD 
 BENTLEY MicroStation Civil Extension v2004 Edition – 1CD 
 BENTLEY MicroStation TriForma v8.05.02.15 - 1CD (2005 Edition) 
 BENTLEY MX 2004 Edition - 1CD 
 BENTLEY HVAC v8.05.02.20 - 1CD (2005 Edition) 
 BENTLEY Stuctural v8.05.02.12 – 1CD (2005 Edition) 
 BENTLEY Process and Instrumentation 2004 Edition v8.06.00.14 - 1CD 
 BENTLEY Redline v8.05.02.35 - 1CD 
 BENTLEY Powerdraft v08.05.02.35 - 1CD 
 BENTLEY JPEG2000 Support for MicroStation v2.0 - 1CD 
 BLACK AND DECKER Everyday Home Repairs – 1CD 
 BLUE RIDGE PARKWAY Screen Saver – 1CD 
 BMW WDS v7.0 Multilanguage DVD – 1DVD
 BOBCAD-CAM and BOBART v20.4 - 1CD 
 BOBCAD-CAM v20.5 – 1CD 
 BOEING KORK Digital Mapping System v14.0 – 1CD 
 BOEING SOFTPLOTTER With Airfield v4.1 – 1CD 
 BOEING SOFTPLOTTER With Airfield v4.1 - 1CD 
 BOEING GIS Feature Collection Module v1.2 For BOEING SOFTPLOTTER v4.1 -
1CD 
 Brother PE Design v6.0 - 1CD 
 BricsCAD Architecturals v4.1.0015 For AutoCAD – 1CD 
 BricsCAD Architecturals v4.1.0015 For BricsCAD – 1CD 
 BricsCAD Pro v6.0.0006 – 1CD 
 BricsCAD Structural Frames v2.1.0003 – 1CD

 CABINET VISION Solid v3.5 - 1CD 
 CADPIPE Suite 2002 v7.0 for AUTOCAD - 1 CD 
   [3D Design, Building Services, Commercial Pipe, HVAC, ISO, Ortho and
PID] 
 CADCAM-E Product - 1CD 
 CADCAME_Ugworks_Bidirectional_v1.1 
 CADCAME_Catemp_v1.0 
 CADCAME_Ciminv_CAT_v1.1 
 CADCAME_Ciminv_UG_v1.1 
 CADCAME_Cimpro_Bidirectional_v9.0 
 CADCAME_Cimpro_UG_v2.0 
 CADCAME_Cimug_Pro_v1.2 
 CADCAME_Igescat5_v1.1 
 CADCAME_Igescat_Bidirectional_v7.1 
 CADCAME_Igespro_v2.1 
 CADCAME_Igesug_v5.0 
 CADCAME_Pscat_Bidirectional_v2.2 
 CADCAME_Psstep_Bidirectional_v1.2 
 CADCAM-E CAT5WORKS v2.0 – 1CD 
 CADCAM-E PSCAT5 v2.2 – 1CD 
 CADCAM-E PSPRO v3.1 – 1CD 
 CADEM SeeNC Mill v6.1 - 1CD 
 CADEM SeeNC Turn v6.1 - 1CD 
 CADENCE OrCAD Unison Suite with Pspice v10.5 – 2CD s
 Cadence Allegro Silicon Package Board v15.5.1 – 4CDs
 CADKEY Workshop EX v21.52 - 1CD 
 CADFIX v7.0 - 1CD 
 CAMBRIDGESOFT Chemoffice Ultra v2005 - 1CD 
 CAMworks v2003 - 1CD 
 CD-ADAPCO GROUP Star-CCM Plus v1.0 – 1CD (For Windows NT/2000) 
 CD-ADAPCO GROUP Star-Design v4.0 For Star-CCM Plus – 1CD (For Windows
NT/2000) 
 CD Adapco Star CD v3.26 – 1CD
 CDLAB Wincan v7.3 MultiLanguage – 1CD 
 CEI ENSIGHT GOLD v8.0 5A - 1CD 
 CEI HARPOON v1.3 - 1CD 
 CGTECH VeriCUT v5.4 - 1CD 
 CHIEF ARCHITECT v10.0 - 3CDs
 CHIEF ARCHITECT VIDEO TRAINING PART1 - 3CDs 
 CHIEF ARCHITECT VIDEO TRAINING PART2 - 3CDs 
 CHIEF ARCHITECT Picture Painter v1.0 – 1CD 
 Chaos Systems TopoCAD v7.2.1 Multilingual - 1CD 
 CHVAC v7.01.11 - 1CD 
 CHEMSTATIONS ChemCad Suite v5.5 - 1CD 
   [CC-Steady State, CC-Dynamics, CC-Batch, CC-Therm, CC-Safety Net and
CC-Flash]
*** Process Simulation Software ***
 ChemOffice Ultra 2006 v10 - 1CD
 ChemMaths v9.0 - 1CD
 ChemEng Software Equations v3.0 – 1CD 
 ChemEng Software DataPro v3.0 – 1CD 
 ChemEng Software ChemMaths v8.0 – 1CD 
 CIMCO DNCMax v4.40.09 - 1CD 
 CIMCO Edit v4.40.09 - 1CD 
 CIMCO SOFTWARE SUITE v5.02.19 - 1CD 
 CIMCO Edit v4.40.01 – 1CD 
 CIM-TEAM E3 SERIES v2004 - 1CD 
 CIM-TEAM E3 SERIES v2004.330 – 1CD 
 CIMATRON v13.1 - 1CD 
 CIMATRON ELITE v7.1 - 3CDs
 CIMATRON QuickNC v4.1 - 1CD 
 CIMMETRY Autovue Solidmodel Professional v18.0 C6 Update – 1CD 
 CIM-TEAM E3 SERIES v2004 - 1CD 
 CIMCO DNCMax v4.40.09 – 1CD 
 CIMCO Edit v4.40.09 – 1CD 
 COADE CAESAR II v4.50 - 1CD 
*** Piping Stress Analysis Software *** 
 COADE PVElite v2005 - 1CD 
 COADE CADWorx Equipment v2006 – 1CD 
 COADE CADWorx PI&D v2006 – 1CD 
 COADE CADWorx Plant Professional v2006 – 1CD 
 COADE CADWorx Steel v2006 – 1CD 
 COADE CADWorx IP v2005 - 1CD 
 COADE TANK v2.5 - 1CD 
 Codeware Compress Build 6245 – 1CD 
 Codeware Coster – 1CD 
 Codeware Drafter – 1CD 
 Codeware Tube Layout – 1CD 
 CODE V v9.50 – 1CD 
 CODE COMPOSER Studio C6000 v2.21 - 1CD 
 COMSOL FEMLAB v3.1 - 3CDs 
 Chemical Engineering For COMSOL FEMLAB v3.1 – 1CD 
 Earth Science For COMSOL FEMLAB v3.1 – 1CD 
 Electromagnetics For COMSOL FEMLAB v3.1 – 1CD 
 Heat Transfer For COMSOL FEMLAB v3.1 – 1CD 
 Mems For COMSOL FEMLAB v3.1 – 1CD 
 Structural Mechanics For COMSOL FEMLAB v3.1 – 1CD 
 COMSOL Multiphysics v3.2 - 4CDs 
 COMPUSOFT Winner v6.0.a1 Multilingual - 1CD
 CORELDRAW Graphics Suite X3 v13.0 – 4CDs
 CORBIS BUSINESS 5 - 1CD 
 CORBIS BUSINESS TEAMS - 1CD 
 CORBIS FOUR ELEMENTS - 1CD 
 CORBIS ON THE ROAD - 1CD 
 CORBIS WORLD PANORAMAS - 1CD 
 CRYSTAL GRAPHICS PowerPlugs Transitions Volume I to III for PowerPoint
– 1CD 
 CRYSTAL GRAPHICS PowerPlugs Templates V – 1CD 
 CRYSTAL GRAPHICS PowerPlugs Templates VI – 1CD 
 CRYSTAL GRAPHICS PowerPlugs Slides That Win – 1CD 
 CRYSTAL REPORTS Professional Edition v11 – 1CD 
 CRTECH Sinapsplus v4.7 – 1CD 
 CRTECH Thermal Desktop v4.7 – 1CD
 CSC Orion R13.2-C0 - 1CD
 CSC TEDDS v8.0 - 1CD 
 CSC FASTRAK v9.0 - 1CD 
 CSI SAP2000 v10.0.1
 CSI ETABS2000 Nonlinear v8.5 
 CSI Section Builder v8.1.0 - 1CD 
 CSI Safe v8.0.3 - 1CD 
 CST EM-STUDIO v2.0 - 1CD 
 CST DESIGN STUDIO v3.0 - 1CD 
 CYPECAD v2003 2D - 1CD 
 C++ Compiler v9.0.022 - 1CD (Intel) – 1CD 

 DASSAULT SYSTEMES CATIA v5r15 SP5 - 1CD 
 DASSAULT SYSTEMES CATIA P2 v5r16 MULTiLANGUAGE - 2CDs 
 DASSAULT SYSTEMES Catia v5r15 Service Pack 1 - 1CD 
 DASSAULT SYSTEMES Catia v5r15 Service Pack 2 - 2CDs 
 DASSAULT SYSTEMES Solidworks 2006 Multilanguage – 4CDs 
 DASSAULT SYSTEMES Catia v5r15 P3 - 2CDs 
 DASSAULT SYSTEMES Catia v5r15 P3 Documentation - 6CDs 
 DASSAULT SYSTEMES Catia v5r15 Service Pack 1 - 1CD 
 DASSAULT SYSTEMES Catia v5r14 P3 Documentation - 4CDs 
 DASSAULT SYSTEMES Catia v5r14 Service Pack 5 - 1CD 
 DASSAULT SYSTEMES Delmia v5r14 - 2CDs 
 DASSAULT SYSTEMES Delmia v5r14 Documentation - 3CDs 
 DASSAULT SYSTEMES Delmia Multicax v5r14 - 1CD 
 DASSAULT SYSTEMES Enovia 3D COM v5r14 - 1CDs 
 DASSAULT SYSTEMES Enovia 3D COM v5r14 Documentation - 2CDs 
 DASSAULT SYSTEMES CAA Catia v5r14 - 1CD 
 DASSAULT SYSTEMES Catia Enovia Multicax v5r14 - 1CD 
 DASSAULT SYSTEMES Enovia DMU Navigator v5r14 - 1CD 
 DASSAULT SYSTEMES Enovia VPM Navigator v5r14 - 1CD 
 DASSAULT SYSTEMES User Companion for Mechanical Design v5r13 - 2CDs
(Tutorials) 
 DASSAULT SYSTEMES User Companion for Hybrid Design v5r13 - 1CD
(Tutorials) 
 DASSAULT SYSTEMES User Companion for Sheetmetal v5r13 - 1CD (Tutorials)
 DASSAULT SYSTEMES User Companion for DMU v5r13 - 1CD (Tutorials) 
 DASSAULT SYSTEMES User Companion for Structural Analysis v5r13 - 1CD
(Tutorials) 
 DASSAULT SYSTEMES User Companion for Extended Structural Analysis v5r13
- 1CD (Tutorials) 
 DASSAULT SYSTEMES Solidworks 2005 Multilanguage - 3CDs 
 DASSAULT SYSTEMES Solidwork 2005 Toolbox - 2CDs 
 CADTECH SolidCAM 2003 v8.2.7 for SolidWorks - 1CD (English and German) 
 CADTECH SolidCAM 2005 v9.2 with Service Pack 4 - 1CD (English and
Russian) 
 MOLDWORKS v2004 SP1 for SolidWorks v2004 - 1CD 
 MSC SIMDESIGNER v2004 R2 for CATIA v5r12 - 1CD 
 MSC SIMDESIGNER v2004 R3 for CATIA v5r13 - 1CD 
 MSC SIMDESIGNER v2004 R4 for CATIA v5r13 - 1CD 
 MSC SIMDESIGNER v2005 R1 for CATIA v5r13 - 1CD 
 MSC SIMDESIGNER SUSPENSION v2004 R3 for CATIA v5r13 - 1CD 
 SPLITWORKS v2004 for SolidWorks v2004 - 1CD 
 DELCAM ARTCAM INSIGNIA v3.6 - 1CD 
 DELCAM ArtCAM Pro and Jewelsmith v8.1 – 1CD 
 DELCAM PowerShape v5.7.30 - 1CD 
 DELCAM PowerMill v6.008 with Service Pack 1 - 1CD 
 DELCAM ArtCAM Pro v8.0 - 1CD 
 DELCAM ArtCAM Jewelsmith v7.1 – 1CD 
 DELCAM CopyCAD v6 - 1CD 
 DELCAM FEATURECAM 2006 v12.2.0.11 - 1CD
 DEFORM 3D v5.03 - 1CD 
 DEFORM 2D v8.02 - 1CD 
 DESIGN DATA SDS2 v6.329 - 3 CDs 
 DesignCAD 3D Max 15 - 1CD 
 DESKPROTO v4.0 - 1CD 
 DISCREET 3D Studio Max v8.0 – 1DVD 
 DISCREET Combustion Unplugged v2005 – 1CD 
 DISCREET Combustion v4.0 – 2CDs 
 DIGITAL TUTORS Fundamentals Of Maya UV Layaut – 2CD 
 DIGITAL TUTORS Maya Photorealistic Car Modeling and Addon Kit Bundle
Set I – 2CDs 
 DIGITAL TUTORS Maya Photorealistic Car Modeling and Addon Kit Bundle
Set II – 3CDs 
 DIGITAL TUTORS Ultimate Fluids - 1CD 
 DIGITAL TUTORS Building Advanced Shading Networks - 1CD 
 DIGITAL TUTORS Principles Of Photoshop Cs - 1CD 
 DIMENSIONAL SOLUTIONS Foundation3D v3.8.6 - 1CD 
 DIMENSIONAL SOLUTIONS Combined3D v3.8.0 - 1CD 
 DIMENSIONAL SOLUTIONS Mat3D v3.8.4 - 1CD 
 DIMENSIONAL SOLUTIONS Shaft3D v2.5 - 1CD 
 DIMENSIONAL SOLUTIONS DSANCHOR v2.5.0 – 1CD 
 DOLPHIN SMASH v5.4 – 1CD 
 DOLPHIN SOCGDS v5.5 – 1CD 
 Dosch Design 3D Shop Design – 1CD (Only 3D Models) 
 Dosch LayerFX AUTOmotion – 1DVD 
 DP TECHNOLOGY ESPRIT v2006– 1CD 
 DRAFIX Pro Landscape v11.2 – 3CDs 
 DSC GOSTEEL v5.0 Service Pack 5 For AUTOCAD – 1CD 
 DLUBAL RSTAB v5.14.321 BiLiNGUAL - 1CD
 DYNASIM Dymola v5.3D – 1CD 
 DYNAFORM PC v5.0 - 1CD 

 EAGLEWARE Genesys v2004.07 – 1CD 
 EARTH RESOURCE MAPPING INC Er Mapper v6.4 - 1CD 
 ERDAS IMAGINE v8.7 with LPS v8.7 – 6CDs 
 EGS FeatureCam 2005 v11.4.0.19 – 1CD 
 EGS FeatureCam 2005 v11.4.0.19 Catia v5 Plugin – 1CD 
 EGS FeatureCam 2005 v11.4.0.19 Solid Edge Plugin– 1CD 
 EGS FeatureCam 2005 v11.4.0.19 Solid Plugin– 1CD 
 EGS SolidEdge And Catia v5 Plugins For FeatureCAM 2004 v11.2.0.23 - 1CD
 EINGANA v1.5 Multilanguage – 2CDs 
 ELECTRONICS WORKBENCH Multisim v8.0.43 - 1CD 
 ELITE SOFTWARE DPipe v2.00.13 - 1CD 
 ELITE SOFTWARE SPipe v2.00.24 - 1CD 
 ELITE SOFTWARE Fire v6.0.173 - 1CD 
 ELITE SOFTWARE GasVent v2.09 - 1CD 
 ELITE SOFTWARE HTools v3.2.14 - 1CD 
 ELITE SOFTWARE Chvac v7.01.32 - 1CD 
 ELITE SOFTWARE Rhvac v8.01.93 - 1CD 
 ELITE SOFTWARE Audit v7.01.156 - 1CD 
 ELITE SOFTWARE Ductsize v6.01.174 - 1CD 
 ELITE SOFTWARE Refrig v3.00.62 - 1CD 
 ELITE SOFTWARE ECA v4.011 - 1CD 
 EliteCAD Architektur v10.1 SP1 Multilanguage – 1CD 
 EMS-I GMS v6.0 Datacode 22112005 - 1CD 
 EMS-I WMS v7.1 Datacode 09082005 - 1CD 
 EMS-I SMS v9.0 Datacode 09282005 - 1CD
 ENVIROWARE FLARES v1.0 - 1CD
 ENGINEERED SOFTWARE Pump Flo 2004 v9.0 - 1CD 
 ENGINEERING DYNAMICS SACS v5.1.06 - 1CD 
 EON Studio v5.2 - 1CD 
 Eovia Carrara v5.0 - 2CDs 
 ESI Group PAM-STAMP 2G v2003 - 2CD (CD1: Windows Version CD2: Unix
Version) 
 ESI Group AUTOSEA2 2004 v2.5.0.8 - 1CD 
 ESI PROCAST v2004.0 – 1CD
 ESRD StressCheck v7.0 - 1CD
 ESRI ArcGIS Desktop v9.1 – 1CD 
 ESPRIT CAM v2003 - 1CD 
 ESKO GRAPHICS ArtiosCAD v6.02 - 1CD 
 ETA Dynaform v5.2 - 1CD 
 ETAP POWERSTATION v4.0 – 1CD 
 ETOS v3.1.14.08 Multilanguage – 1CD 
 EZ-CAM EZ-Mill Turn Pro v14.5 - 1CD 

 FASTSHIP v6.1 - CD 
 FE-DESIGN Tosca v5.0 - 1CD 
 FE-SAFE v5.0 – 1CD 
 FEM DESIGN v5.21 - 1CD 
 FIDES Suite 2005 (July 2005) Bilingual – 1CD 
 FIDES Arw v2005.076 Bilingual – 1CD 
 FIDES Bearing Capacity v2004.219 Bilingual – 1CD 
 FIDES Earth Pressure v2004.219 Bilingual – 1CD 
 FIDES Geo Planning v2004.313 Bilingual – 1CD 
 FIDES KEA v2004.322 Bilingual – 1CD 
 FIDES PILEpro FEM v2004.313 Bilingual – 1CD 
 FIDES Settlement 2.5D v2004.329 Bilingual – 1CD 
 FIDES Settlement v2004.219 Bilingual – 1CD 
 FIDES SlipCircle v2004.257 Bilingual – 1CD 
 FIDES Twist v2005.060 Bilingual – 1CD 
 FIDES WinTUBE v2004.116 Bilingual - 1CD 
 FIDES Walls v2004.099 Bilingual - 1CD 
 FIDES Walls Bemessung v2003.288 Bilingual - 1CD 
 FIDES Walls.FEM v2004.041 Bilingual - 1CD 
 FIDES Walls Dimensioning v2004.288 Bilingual – 1CD 
 FIDES Walls FEA v2004.232 Bilingual – 1CD 
 FIDES Drill v2004.092 Bilingual - 1CD 
 FIDES Erddruck v2004.041 Bilingual – 1CD 
 FIDES Flow v2004.036 Bilingual - 1CD 
 FIDES Gleitkreis v2004.041 Bilingual - 1CD 
 FIDES Grundbruch v2004.041 Bilingual - 1CD 
 FIDES KEM v2004.041 Bilingual - 1CD 
 FIDES Setzung.25D v2004.042 Bilingual - 1CD 
 FIDES Setzung v2004.041 Bilingual - 1CD 
 FIDES SteelCON v2003.308b Bilingual - 1CD 
 FIDES WinIGEL v2004.043 Bilingual - 1CD 
 FIDES WinIGEL 3D v2004.313 Bilingual - 1CD 
 FlexPde Professional 3D v5.0.3 - 1CD
 FLOW SCIENCE Flow 3D 8.11 - 1CD 
 FLOWMASTER2 v6.4.1 - 1CD 
 FLUENT FlowLAB v1.2.10 (Win/Linux) – 1CD 
 FLUENT MixSim v2.0.2 (Win/Linux) – 1CD 
 FLUENT v6.1 - 2CDs 
 FLUENT v6.1, Manual and Tutorials Guide, (PDFs) -1CD 
 FLUENT v6.2.16 - 2CDs
 Fluent for CATIA v5.v1.0.8 – 1CD
 FLUENT Icepack v4.0 - 1CD 
 FLUENT Airpack v2.06 - 1CD 
 FLUENT PolyFlow v3.92 .1CD 
 FLUENT TGrid v3.5.4 .1CD 
 FLUENT Fidap v8.7.0 - 1CD 
 FLUENT Gambit 2.1.2 User Manual, (PDFs) - 1CD 
 FLUENT Gambit v2.2 (Win/Linux) - 1CD 
 FLUENT Flow Wizard v1.0.8 - 1CD 
 FORMSYS MAXSURF Suite v11 - 1CD 
 FormZ RadioZity v5.5 - 1CD 
 FTI Fastform Advanced v10.2 - 1CD 
 FTI Fastform Advanced v10.3 - 1CD 
 FTI Fastblank v5.3 - 1CD 
 FTI Blanknest v5.0 - 1CD 
 FTI Blankworks v2.2 - 1CD 

 GAMMATECH GT Suite v6.1 - 1CD 
 GENSTAT v8.1 – 1CD 
 GIBBSCAM 2005 v7.7 – 1CD 
 GRAPHICODE PowerPlatform v4.1.4 - 1CD 
 GRAPHISOFT ARCHIGLAZING for ARCHICAD v9.0 - 1CD 
 GRAPHISOFT ARCHICAD v9.0 R1 International – 2CDs 
 CIGRAPH FACTORY v2005 for ARCHICAD v9.0 Hybrid – 1CD 
 GRAPHICODE PowerPlatform v4.2.2 - 1CD 
 GRAITEC Advance v5.2 – 2CDs 
 GRAITEC Advance Steel Suite v5.2 – 1CD 
 GRAITEC OMD v12.1H – 1CD 
 GT STRUDL v27 - 1CD 

 HAESTAD METHODS WaterCAD v6.5120n - 1CD 
 HAESTAD FLOWMASTER v2005 - 1CD 
 Hampson Russell CE v7.R3.2 - 2CDs (Win/Linux) 
 HEIDELBERG Signastation v8.0.1 - 1CD 
 HKS ABAQUS v6.5-1 – 2CDs 
 HKS ABAQUS v6.5-1 Documentation – 1CD
 HONEYWELL UniSim Design R350.1 build 11051 - 1CD
*** Process Simulation Software - New version of HYSYS *** 
 HP Openview Storage Data Protector v5.5 – 1CD 
 HTFS v2001 – 1CD 
 HTFS v2003 – 1CD (Acol v6.30 – Fihr v2.10 – Tasc v5.10) 
 HTRI Xchanger Suite v4.0 - 1CD 
   [ Xace ®, Xfh ®, Xhpe™ , Xist ®, Xjpe™ , Xphe ® , Xtlo ®, and Xvib ®]
*** All types of Heat Exchanger Design Software *** 
 Hummingbird Exceed v9.0 - 1CD 
 Hummingbird Exceed 3D v9.0 - 1CD 
 Hummingbird Docsopen Enterprise v4.0 - 1CD
 HYDPRO v1.2.19 – 1CD

 ICEM Surf v4.5 - 2CDs 
 IDRISI Kilimanjaro v14.0.1 - 1CD 
 ILIGHT FIELDVIEW v11 - 2CDs 
 IMAGEWARE Unilet Pro v6.0.5 Multilingual – 1CD 
 IMSI FLOORPLAN 3D Design Suite v9.0 – 1CD 
 IMSI TurboCAD Professional v12 - CD 
 IINUS Technology RapidForm v2004 - 1CD 
 INUS Technology RapidForm v2004 Plus Pack 2 - 1CD 
 INSTALLSHIELD X Premier Edition v10.5 - 1CD 
 INSTALLSHIELD X Premier Edition v10.5 SP1 - 1CD 
 INTELLIGENT LIGHT Fieldview v10.0 – 2CDs 
 INTERGRAPH Smartsketch v5.00.21 – 1CD 
 INTERGRAPH Intools v5.2 – 1CD 
 Intel C Plus Plus Compiler v9.0.028 - 1CD 
 Intel Visual Fortran Compiler v9.0.028 - 1CD 
 INTUIT TurboTax Premier 2004 WinMac – 1CD 
 INTUIT QuickTax 2004 Platinum Canadian – 1CD 
 INVENSYS SIMSCI Pro/II v7.1 - 1CD
*** Process Simulation Software ***
 INVENSYS SIMSCI DYNSIM v4.0 – 1CD 
 INVENSYS SIMSCI Pipephase v9.0 - 1CD 
 IRONCAD v8.0 – 1CD 
 ITEDO IsoDRAW v6.0 - 1CD 
 ITASCA FLAC3D v3.0 – 1CD 
 ITT Promedia 2005 v.8.0 – 1CD 

 KEIL Development C51 C251 C166 Tools v2004 – 1CD 
 KEPLER v7.0 – 1CD 
 KUBOTEK KeyCreator v3.0.2 Multilanguage – 1CD 
 KURV STUDIOS LightWAVE3D Industrial Modeling Series Product Creation
Vol1 – 1CD 

 LECTRA KALEDO Color Management v1R1c3 - 1CD 
 LECTRA KALEDO Style v1R1c9 Multilingual - 1CD 
 LECTRA KALEDO Style v1R1c11 Multilingual - 1CD 
 LECTRA U4IA GRAPHIC v7R1C10 - 1CD 
 LECTRA Catalog v2.1C1 - 1CD 
 LECTRA Vectorpilot v2R2C1 - 1CD 
 LECTRA Formaris Furniture v5R1 Multilingual - 1CD 
 LECTRA Graphicspec Furniture v2R5 - 1CD 
 LECTRA Focuspilot v2R2C1 - 1CD 
 LECTRA Leather v3R1 Multilingual – 1CD 
 Lectra Diamino Furniture v5R2 Multilanguage - 1CD 
 Lectra Diamino TechTex v5R2 Multilanguage - 1CD 
 Lectra Diamino Footwear v5R2 Multilanguage - 1CD 
 LICOM SYSTEMS ALPHACAM v2004 - 1CD 
 LIZARDTECH Geoexpress v4.0 - 1CD 
 LMS SYSNOISE v5.6 - 1CD 
 LMS FALANCS v2.13 – 1CD 
 LMS TEST.LAB v4.0 – 1CD 
 LS-DYNA v970.6763 PARALLEL DOUBLE – 1CD
 LUSAS FEA v13.57 - 1CD 

 MACROVISION FLEXNET ADMIN STUDIO v7.0 - 1CD 
 MACROVISION INSTALLSHIELD PREMIER v11.5 - 1CD 
 MapInfo MapXtreme 2005 v6.5.0.362
 MAPLESOFT MAPLE v10.0 for MacOSX - 1CD 
 MAPLESOFT MAPLE v9.1 - 1CD 
 MAPLESOFT MAPLE v9.5 HYBRID - 1CD 
 MAPLESOFT Maple v10.02 UPDATE
 MAK SOFTWARE SUITE v4.0 – 1CD 
 MAK PVD v2.7 – 1CD 
 MAK RTI v2.2 – 1CD 
 MAK Data Logger v3.9A – 1CD 
 MAK VR-Link v3.9.1 – 1CD 
 MAK Gateway v4.1.1 – 1CD 
 MaxonForm v9.103 For Archicad – 1CD 
 MASTERCAM X v10.0 - 1CD 
 Mathworks Matlab R2006a - 3CDs
 MATLAB 6.5.1 (Release 13SP1) Manual, (PDFs) - 1CD 
 MathXpert Calculus Assistant v3.02 – 1CD 
 MATHSOFT MATHCAD v13.0 Enterprise Edition – 1CD 
 MATRIX42 Empirum Pro v2005 SR3 – 1CD 
 MAXSURF v9.52 Suite – 1CD 
 MENTOR Graphics WG v2004 - 1CD 
 MENTOR Graphics SDD v2004 - 1CD 
 MENTOR GRAPHICS ISD 2004 SP4 - 3CDs 
 MENTOR GRAPHICS Expedition Suite v2005 – 1DVD
 Mentor Graphics HyperLynx v7.5 - 1CD 
 MENTOR Graphics Integrated Systems Design 2004 with Service Pack 2 –
3CDs 
 MENTOR Graphics HyperLynx v7.5 – 1CD 
 MENTOR PADS PCB Design Solutions v2005 - 1CD 
 MENTOR PADS PCB Design Solutions v2005 Service Pack 1 (Update) – 1CD 
 MENTOR Graphics Integrated Systems Design 2004 with Service Pack 2 -
3CDs 
 Meta Cut Utilities v3.0 - 1CD
 MICROPROTOL v32.4 - 1CD
*** Heat Exchanger Design Software *** 
 MICROSTRAN v8.0 – 1CD 
 MIDAS CIVIL v6.3 - 1CD 
 MIDAS SET v3.2.1 - 1CD 
 Mimaki FineCut 5.2 for CorelDRAW Multilanguage - 1CD 
 Mimaki FineCut 6.2 for Adobe Illustrator_Multilanguage - 1CD 
 MINITAB v14.12 – 1CD 
 MISSLER TopSolid 2005 v6.6 (252) - 1CD
 Modeling A Head Cinema 4D Training – 2CDs
 MOLDFLOW Plastics Advisers MPA v7.1 R1 - 1CD 
 MOLDFLOW Plastics Insight MPI v5.0 R1 - 1CD 
 MOLDFLOW Design Link v5.1 - 1CD 
 MOLDFLOW Dynamic 9.5 - 1CD 
 MOLDFLOW Works v1.1 R1 – 1CD 
 MOLDFLOW CAD DOCTOR V1.0 - 1CD 
 MSC Patran v2005 Release 2 - 3CDs 
 MSC FEA MSC AFEA v2005 R2 - 1CD 
 MSC Marc v2005 R2 - 2CDs 
 MSC AFEA v2004 - 1CD 
 MSC Adams 2005 - 2CDs (Windows) 
 MSC Adams 2005 - 1CD (Linux) 
 MSC Documentation 2005 – 1CD (for MSC.Nastran - MSC.Patran - MSC.Marc -
MSC.Dytran) 
 MSC Dytran v2005 - 1CD 
 MSC EASY5 v2004 - 1CD 
 MSC Enterprise Mvision v2004 - 1CD 
 MSC Fatigue v2005 for Patran - 1CD 
 MSC Interactive Physics v2004 - 1CD 
 MSC Marc v2005 - 1CD 
 MSC Nastran v2004 - 1CD 
 MSC Nastran v2004 Release 2 - 1CD 
 MSC Nastran v2004 Release 3 - 1CD 
 MSC NASTRAN For Windows v2004 R1 – 1CD 
 MSC Nastran v2005 - 1CD 
 MSC ROBUSTDESIGN v2004 R3.5 – 1CD 
 MSC SIMDESIGNER v2005 R2 for CATIA v5r14 – 1CD 
 MSC SIMDESIGNER SUSPENSION v2004 R3 for CATIA v5r13 - 1CD 
MSC SuperForm v2005 – 1CD 
 M SC Visual Nastran Desktop v2004 - 1CD 
 MSC Visual Nastran Desktop v2004 with Service Pack 1 - 1CD 
 MSC Visual Nastran Desktop v2004 with Service Pack 2 - 1CD 
 NE Nastran Engine v8.3.1 - 1CD 
 NE Nastran Modeler v8.3.0 - 1CD 

 NATIONAL INSTRUMENTS LabVIEW v6.1 - 1CD 
 NATIONAL INSTRUMENTS LabVIEW Application Builder v6.1 - 1CD 
 NATIONAL INSTRUMENTS LabVIEW v7.0 - 2CDs 
 NATIONAL INSTRUMENTS Vision v8.0 Development Module - 1CD 
 NATIONAL INSTRUMENTS LabVIEW v7.1 Professional Development System - 1CD
 NATIONAL INSTRUMENTS SignalExpress v1.2 Tektronix Edition – 1CD 
 NATIONAL INSTRUMENTS IMAQ Vision Development Module for LabVIEW v7.0 -
1CD 
 NATIONAL INSTRUMENTS Vision Development Module for LabVIEW v7.1 - 1CD 
 NATIONAL INSTRUMENTS IMAQ for IEEE 1934 Cameras v2.0.1 - 1CD 
 NATIONAL INSTRUMENTS Teststand v3.1 - 1CD 
 NATIONAL INSTRUMENTS ECU MEASUREMENT AND CALIBRATION TOOLKIT v1.01 -
1CD 
 NATIONAL INSTRUMENTS Switch Executive v2.1 - 1CD 
 NATIONAL INSTRUMENTS DAQmx v8.0 - 1CD 
 NATIONAL INSTRUMENTS Motion Assistant v1.3.0 – 1CD 
 NATIONAL INSTRUMENTS Motion v7.2 - 1CD 
 NATIONAL INSTRUMENTS VI Logger v2.0.1 - 1CD 
 NATIONAL INSTRUMENTS Vision Builder For Automated Inspection v2.6.1 -
1CD 
 NATIONAL INSTRUMENTS Measurement Studio Enterprise Edition v7.1 - 1CD 
 NATIONAL INSTRUMENTS DSP Module v1.0 – 1CD 
 NATIONAL INSTRUMENTS Lookout v6.02 - 1CD
 NavisWorks Jetstream Multilanguage v4 - 1CD
 NEMETSCHEK Vectorworks v11.0 HYBRID - 1CD
 NEMETSCHEK Vectorworks v11.5 (Update v11.0 to v11.5) - 1CD 
 VECTORWORKS v12 for MAC OSX – 3CDs
 NAVISWORKS v3.6 - 1CD 
 NC GRAPHICS Depocam v6.0.9 - 1CD 
 NCSS 2004 And PASS 2005 v2.0.0.462 - 1CD 
 Nissan EPC v04.2005 - 1CD 

 OpenMind HyperCAD 2005.1_8.12.2005 Multilanguage - 1CD 
 OpenMind HyperMILL v9.0 Include SP4 HF 29087 Multilanguage - 1CD 
 OPENMIND Hypermill v5.2 - 1CD 
 OSLO Premium v6.2 
 Olga2000 v4.17.3 - 1CD 

 Palisade Decesion Tools v4.5.4 - 1CD 
  [@RISK 4.5 for Excel, BestFit 4.5, PrecisionTree 1.0 for Excel,
RISKview 4.5 and TopRank 1.5   for Excel] 
*** Risk Management Software *** 
 PALOALTO BUSINESS Plan Pro v2005 Canadian Edition – 1CD 
 PATHTRACE EdgeCAM v10.0 - 1CD
 Paradigm Geolog v6.6 - 1CD 
 Paulin Reserach Group 2005 Software - 1CD 
   [Nozzle Pro 6.0, Mat Pro 1.0, Axi Pro 2.1, FE/Pipe v4.2, BOS Fluids
v4.2, Mesh Pro 2.0, Splash, Stress Plot 1.0 and Plas Plot 1.0] 
 PEACHTREE Complete Accounting v2005 – 1CD 
 PEACHTREE First Accounting v2005 – 1CD 
 PERI ELPOS v4.0 - 1CD
 PERICAD 2006 FOR AUTODESK ARCHITECTURAL DESKTOP v2006 - 1CD
 Petroleum Experts IPM v4.0 - 1CD
   [GAP v5.04, MBAL v7.0, PRODMAN v5.04, PROSPER v8.01, PVTP v6.5,
RESOLVE 1.0, and REVEAL v1.0]
 PHOENICS v3.5 - 1CD 
 Pipenet (with manuals) – 1CD 
   [Spray v3.40 - Standard v3.40 - Transient v5.30] 
 Pipe FLOW3D v1.037 - 1CD 
 PIPING SYSTEMS FluidFlow v2.32 - 1CD
 Plaxis Professional v8.2 -1CD 
 PROKON CalcPAD v2.0 - 1CD 
 POINTWISE Gridgen v15.06.R.01 – 1CD 
 PRESTO v8.65 - 1CD 
 PRIMAVERA Project Planner v3.1 - CD 
 PRIMAVERA Expedition v7.0 - 1CD 
 PROTEUS ENGINEERING MAESTRO v8.7 – 1CD 
 ProgeCAD v2006 Professional v6.16 - 1CD 
 ProgeARC v2006 For ProgeCAD – 1CD 
 PTC Pro Engineer Wildfire v3.0 windows - 3CDs
 PTC Progressive Die Extension v2.1 Code 2004030 - 1CD (For Pro/Engineer
Wildfire v2.0) 
 PTC Expert MoldBase Extension v4.1 Code 2004120 - 1CD (For Pro/Engineer
Wildfire v2.0) 
 PTC Pro/Engineer Routed Systems Designer 6.0 - 1CD 
 PTC Mold Expert for Pro/Engineer Wil.re 2003 Code 130 - 1CD 
 PTC Basic Library for Pro/Engineer WildFire - 1CD 
 PTC Connector Library for WildFire - 1CD 
 PTC Electrical Symbols Library for WildFire - 1CD 
 PTC Graphics Library for WildFire - 1CD 
 PTC MoldBase Library for WildFire - 1CD 
 PTC Piping and Heating Symbols Library for WildFire - 1CD 
 PTC Pipe Fitting Library for WildFire - 1CD 
 PTC Tooling Library for WildFire - 1CD 
 PTC Pro/CONCEPT 2.0 - 1CD 
 PTC INTRALINK v3.4 M011 – 1CD 
 PUNCH HOME DESIGN Architectural Series 4000 - 2CDs 
 PVTSim v15.0 - 1CD 

 RAINDROP GEOMAGIC Studio V7.0 – 2CDs 
 RAINDROP GEOMAGIC Cadmus Fashion v6.0 - 1CD 
 RAINDROP GEOMAGIC QUALIFY v8.0 - 2CDs 
 RAPID INTERACTIVE STRUCTURAL ANALYSIS 3D v5.5 (RISA 3D v5.5) - 1CD 
 RAM CONCEPT v1.2 - 1CD 
 RAM STRUCTURAL SYSTEM v8.13 – 1CD 
 REACTION DESIGN CHEMKIN v4.0 – 1CD 
 REBIS PlantFLOW v6.0 – 1CD
 Reiworld Staad Beam v1.2 – 1CD
 RETAINPRO v6 - 1CD 
 REIUSA Staad Pro 2005 - 1CD 
 REIUSA STAAD FOUNDATION v2.0 – 1CD 
 REVISIONFX Reflex v3.02 – 1CD 
 Robot Millennium v19.0 - 1DVD 
 ROCKWELL Arena v7.0 - 1CD 
 Rockworks 2004 v5.9.30 – 1CD
 ROXAR IRAP RMS v7.4 - 1CD

 S10 v2003 Profesional – 1CD (Peruvian Software) 
 SAP R3 v4.6d - 2CD (Mini SAP R3 v4.6d) 
 SAP Web Application Server 620 – 3CDs (For Mini SAP) 
 SAS v9.0 - 6CDs 
 SCIA ESA PT v5.2.114 - 1CD 
 SEMCAD v8.1 - 1CD 
 SESCOI WorkNC v16.21 Multilanguage - 1CD 
 SERIF PagePlus v11 – 2CDs 
 Schlumberger Eclipse v2005A - 1CD 
 SCHLUMBERGER Pipesim 2003 v1.0 - 1CD 
 SCHLUMBERGER Petrel v2004 – 1CD 
 SIEMENS Sinutrain v6.3 Multilanguage - 1CD 
 SIEMENS Simatic WinCC Flexible v2005 Multilanguage - 2CDs 
 SIEMENS Simatic Step7 Professional Edition v2004 SR3 Multilanguage –
2CDs 
 SIEMENS Simatic Step7 v5.3 SP3 Multilanguage – 2CDs 
 SIGMA DESIGN Arris v8.3.103 – 1CD 
 SIMSCI Pipephase v8.1 - 1CD 
 SIMSCI Visual Flow.v4.1 - 1CD 
 SIMSCI Process Engineering Suite 2002 - 1CD 
 SIMSCI DataCon v3.13 - 1CD 
 SIMSCI HexTran v8.11 - 1CD 
 SIMSCI InPlant v 3.03 - 1CD 
 SPSS v13.0 - 1CD 
 SPSS Manual, (PDFs) - 1CD 
 SPICER Imagenation v7.50 WiN32 – 1CD 
 SRAC COSMOS Work Suite v2004 Multilanguage - 1CD 
 SRAC COSMOSWorks v2006 - 1CD
 COSMOSMotion v2006 SP1 Multilingual - 1CD 
 COSMOSWorks v2006 - 1CD 
 COSMOSM v2.95 SP2 - 1CD 
 SRAC COSMOSFloWorks v2005 - 1CD 
 SRAC COSMOSMotion v2005 - 1CD 
 SRAC COSMOS DesignSTAR v4.5 – 1CD 
 STEINBICHLER Cometinspect v2.0 - 1CD 
 STEINBICHLER COMET T-Scan v4.2 - 1CD 
 STRAUS v7.0 – 1CD 
 STOCKBYTE 119 WEIGHT CONTROL - 1CD
 SUPER FINSIM v7.0.14 - 1CD 
 SURFWARE SURFCAM VELOCITY v2005.SP1 - 1CD 
 SURFWARE SURFCAM v2005 with Service Pack 1 - 1CD 
 SYNAPTICAD Allproducts v10.05A – 1CD 
 SYSTRAN Professional Premium v5.0 Multilanguage – 1CD 

 TEBIS CADCAM v3.1R12 - 1CD 
 TECNOMATIX EM-Workplace v6.0.3 - 1CD 
 TECNOMATIX EM-Power v7.2 - 1CD 
 Tekla Xsteel Strcutures v11.0 - 1CD 
 THERMOANALYTICS RadTherm v7.01 - 1CD 
 Thermoflow Suite v13 2004 Edition – 1CD
 THINK3 ThinkDesign v2005.1 - 1CD 
 TOTAL 3D LANDSCAPE Deluxe 2005 v8 - 2CDs 
 TRACEPARTS v2.1.1 with SP2 - 1CD 
 TRACE Pro v3.2.2 - 1CD 
 TRANSLOGIC Ease v5.2 R9 and Eale v5.2 R8 – 1CD 
 TRANSLOGIC HDL Companion v1.1 R2 – 1CD 
 TransMagic Plus v2005 with Service Pack 4 - 1CD 
 TRUMPF Tops 600 v3.0 – 1CD 
 T-SYSTEMS Medina v7.4.4 – 1CD
 T-Surf Gocad v2.1.2 - 1CD

 UGS Unigraphics NX v4.00 – 2CDs 
 UGS UNIGRAPHICS NX V4.0.0.25 MP01 UPDATE ONLY - 1CD
 UGS NASTRAN NX4 - 1CD
 UGS CAST FOR NX4 - 1CD
 UGS MOLDWIZARD NX 4.0 - 1CD
 UGS Die Design Standard Part Library for Unigraphics NX v3.0 - 1CD 
 UGS Cast Unigraphics NX v3.0 - 1CD (Tutorials) 
 UGS Solid Edge v18
 UGS TeamCenter Engineering iMAN v9.0 - 1CD
 UGS TeamCenter Engineering iMAN Portal v8.1- 1CD
 UGS TeamCenter Manufacturing v8.1 - 1CD 
 UGS Teamcenter Visualization v5.1 - 1CD 
 UGS Femap v9.0 – 1CD 
 UGS I-Deas v11.0 NX Series full - 6CDs 
 UGS I-Deas v11.0 NX Update M3 - 2CDs 
 UGS I-Deas v11.0 NX Series Update M1 - 4CDs 
 UGS Imageware v12.1 - 1CD 
 MECHSOFT Mechanical DesignPack for Unigraphics NX v2.0 - 1CD 
 MECHSOFT for SolidEdge v15 - 1CD 
 UTS Advanced Spring Design v6.0 – 1CD 

 VANTAGE AVEVA PDMS v11.6 - 1CD 
 VASCI AUTOSEA v2.3.1 – 1CD 
 VERO VISI CAD CAM Series v12.1 – 1CD 
 VERO MACHINING Strategist v6.1 – 1CD 
 Visual Fortran (Compaq) Professional v6.6 - 1CD 
 Visual Fortran Compiler (Intel) v9.0.018 – 1CD 
 Visual C++ v6.0 (Microsoft) Professional Edition - 1CD 
 VisualDisk M04 Woods – 1CD (Only Photos about Woods with high
resolution) 
 VisualDisk N21 Trees – 1CD 
 VisualDisk N17 Meadow – 1CD 
 Visual Mill v5.08 - 1CD 
 VMWare Workstation v4.5.2 – 1CD 
 VMWare ESX Server v2.5.1 – 1CD 
 VMware VirtualCenter v1.3.1.SUB100 - 1CD 
 VTC Implementing A Windows Server 2003 Network Infrastructure 70.291 –
1CD 
 VTC Managing And Maintaining Windows Server 2003 70.290 - 1CD 
 VX CAD CAM v11.21 - 1CD 

 WATERCOM PIPES Plus Plus v2004.3 - 1CD 
 WATERCOM DRAINS v2004 - 1CD 
 WATERLOO HYDROGEOLOGIC Visual Modflow Pro v3.1 
 Wilcom v9.0 with Service Pack 3 – 1CD 
 WISE GerberTool v13 SR5 - 1CD 
 WOLFRAM RESEARCH Mathematica v5.1 - 1CD 
 WOLFRAM RESEARCH Mathematica V5.2 for MAC OSX – 1CD 
 WRQ Reflections Suite v13 Multilanguage - 1CD 

 XP SWMM v9.5 - 1CD 

 YOSEMITE TECHNOLOGIES TapeWare v7.0 Multilingual - 1CD

Codes and Standards / Miscellaneous items

 Acess of ASME / ANSI (American Society of Mechnical Engineers /
American National Standards Institute ) Standards; latest editions
 Acess of API (American Petroleum Institute) Standards; latest editions
 Acess of ASTM ( American Standard of Testing Materials) Standards;
latest editions
 NFPA (National Fire Protection Association) Standards; latest editions
 NACE ( National Association of Corrosion Engineers ) Standards; latest
editions 
 3D Total Textures - 15 CDs (Volume 1 to 15) 
 
........and much much more
See software and Price list here

http://softwareps.aboutus.ms 


E-Mail: 
====== 

contact us at: software.problem.solution@g... or
softwareps.team@g...

when writing email to us, please let us know from where you got our
email adderess?

*=This is just for improving our service. Thanks for your cooperation.


Note: 
=====

1) Dear Readers, do not put any replies here. SoftwarePS will not check
any replies here on the forum.

Please, use our email address: software.problem.solution@g...,
softwareps.team@g...

2) If you could not find any reply from us in your inbox.. Please, check
ur spam mail folder.


*** Sent via Developersdex http://www.developersdex.com ***