UN/EDIFACT Message Type : Batch : QALITY

__ United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport __UN/EDIFACT

Message Type : QALITY Version : D Release : 08A Contr. Agency: UN Revision : 5 Date : 2008-05-30 SOURCE: TBG1 Supply Chain CONTENTS Quality data message 0. INTRODUCTION 1. SCOPE 1.1 Functional definition 1.2 Field of application 1.3 Principles 2. REFERENCES 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions 4. MESSAGE DEFINITION 4.1 Segment clarification 4.1.1 Header section 4.1.2 Detail section 4.2 Segment index (alphabetical sequence by tag) 4.3 Message structure 4.3.1 Segment table ---------------------------------------------------------------------- For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction ---------------------------------------------------------------------- 0. INTRODUCTION This specification provides the definition of the Quality data message (QALITY) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE 1.1 Functional definition A message to enable the transmission of the results of tests performed to satisfy a specified product or process requirement. The content includes, but is not limited to, test data and measurements, statistical information, and the testing methods employed. 1.2 Field of application The Quality data message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3 Principles - A Quality Data Message detail line may refer to either goods items or services. - The values within a Quality Data Message may refer to: . a product/service, . a product via batch references, . process type information of a product. - A Quality Data Message may contain discrete or statistical values as well as product specification values. 2. REFERENCES See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS 3.1 Standard terms and definitions See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION 4.1 Segment clarification This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message: All specified dates/times should be in the format 'ccyymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.) Where a choice of code or text is given only the code element should be used wherever possible. Conditional data that is not required in the message should not be included. Care must be taken that the segment qualifier in dependent segments do not conflict with the segment qualifier of the trigger segment of a group. Free text information within the message should be avoided as this inhibits automatic processing. 4.1.1 Header section Information to be provided in the Header section: 0010UNH, Message header A service segment starting and uniquely identifying a message. The message type code for the Quality data message is QALITY. Note: Quality data messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 QALITY 0052 D 0054 08A 0051 UN 0020BGM, Beginning of message A segment by which the sender uniquely identifies the Quality Data Message by means of its type and number. 0030DTM, Date/time/period A segment specifying general dates and, when relevant, times related to the whole message. The segment must be specified at least once to identify the quality data message date. Example of the use of this DTM-segment is : date/time frame of reported data that apply to the whole quality data message. The Date/time/period segment within other segment groups should be used whenever the date/time/period requires to be logically related to another specified data item; e.g. date of measurement must be specified within the measurement segment group. 0040IMD, Item description A segment for describing the product involved. 0050MEA, Measurements A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product. 0060FTX, Free text A segment with free text information, in coded or clear form, to give further clarification, when required, to the whole message. In computer to computer exchanges such text will normally require the receiver to handle this segment manually. 0070 Segment group 1: RFF-DTM A segment group for referencing documents and where necessary, their dates, relating to the whole message, e.g. purchase order, shipment/consignment number. 0080RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0090DTM, Date/time/period A segment specifying the date/time of the referenced document. 0100 Segment group 2: NAD-LOC-SG3-SG4 A group of segments identifying the parties relevant to the whole Quality Data Message, with associated information. 0110NAD, Name and address A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the whole Quality Data Message. Identification of the Sender and Receiver party is mandatory for the Quality Data Message. They are to be given in the NAD segment. 0120LOC, Place/location identification A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number. 0130 Segment group 3: RFF-DTM A segment group giving references and where necessary, date information only relevant to the specified party. 0140RFF, Reference A segment identifying the reference by its number and where appropriate a line number within a document. 0150DTM, Date/time/period A segment specifying the date/time of the reference. 0160 Segment group 4: CTA-COM A group of segments giving contact details of the specific person or department within the party identified in the NAD segment. 0170CTA, Contact information A segment to identify a person or department, and their function, to whom communications should be directed. 0180COM, Communication contact A segment to identify a communication type and number for the contact specified in the CTA segment. 4.1.2 Detail section Information to be provided in the Detail section: 0190 Segment group 5: LIN-PIA-IMD-MEA-PSD-SPS-DTM-QTY-FTX-SG6-SG7- SG10-SG12-SG20-SG30 A group of segments providing the relevant quality data for the specified product. 0200LIN, Line item A segment identifying the line item by its number and additionally, identifying the product involved by a product identification number. Other product identification numbers are specified in the following PIA segment, e.g. Customer part number, etc. 0210PIA, Additional product id A segment providing additional product identification to that specified in the LIN segment, e.g. Buyer part number. 0220IMD, Item description A segment for describing the product involved. This segment should be used for products that cannot be identified by a product code or article number. 0230MEA, Measurements A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product. 0240PSD, Physical sample description A segment to define the physical sample parameters, associated with a test, resulting in discrete measurements. If used in this position, the values apply to all following values of product properties. 0250SPS, Sampling parameters for summary statistics A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values apply to all following values of product properties. 0260DTM, Date/time/period A segment specifying date/time/period details to the line item only. 0270QTY, Quantity A segment to enable quantity information to be specified. 0280FTX, Free text A segment with free text in coded or clear form, to give further clarification, when required, for the line item. In computer to computer exchanges such text will normally require the receiver to handle this segment manually. 0290 Segment group 6: RFF-DTM A segment group for referencing documents relating to the line item and where necessary, their dates. 0300RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0310DTM, Date/time/period A segment specifying the date/time of the referenced document. 0320 Segment group 7: NAD-LOC-SG8-SG9 A group of segments identifying the parties with associated information, relevant to the line item only. 0330NAD, Name and address A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the line item. 0340LOC, Place/location identification A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number. 0350 Segment group 8: RFF-DTM A segment group giving references and where necessary, date information only relevant to the specified party. 0360RFF, Reference A segment identifying the reference by its number and where appropriate a line number within a document. 0370DTM, Date/time/period A segment specifying the date and/or time of the reference. 0380 Segment group 9: CTA-COM A group of segments giving contact details of the specific person or department within the party identified in the NAD segment. 0390CTA, Contact information A segment to identify a person or department, and their function, to whom communications should be directed. 0400COM, Communication contact A segment to identify a communication type and number for the contact specified in the CTA segment. 0410 Segment group 10: TEM-MEA-DTM-SG11 A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates. 0420TEM, Test method A segment to describe the nature of the test performed. 0430MEA, Measurements A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed. 0440DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time. 0450 Segment group 11: RFF-DTM A segment group of referencing documents relating to the test method and where necessary, their dates, e.g. device number. 0460RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0470DTM, Date/time/period A segment specifying the date/time of the referenced document. 0480 Segment group 12: CCI-PSD-SPS-DTM-FTX-SG13-SG14-SG16-SG18 A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified. 0490CCI, Characteristic/class id To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments. The data element Characteristic description (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions. 0500PSD, Physical sample description A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group. 0510SPS, Sampling parameters for summary statistics A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group. 0520DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed. 0530FTX, Free text A segment with free text information to give further clarification within Segment group 12: the Analysis Group. 0540 Segment group 13: RFF-DTM A segment group of referencing documents relating to the Analysis Section and where necessary, their dates, e.g. Purchase order, shipment note. 0550RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0560DTM, Date/time/period A segment specifying the date/time of the referenced document. 0570 Segment group 14: MEA-DTM-SG15 A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement purpose code qualifier (6311) indicates the type of the values. 0580MEA, Measurements A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes. 0590DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time. 0600 Segment group 15: RFF-DTM A Segment group of referencing documents relating to the specifications and values and where necessary, their dates. 0610RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0620DTM, Date/time/period A segment specifying the date/time of the referenced document. 0630 Segment group 16: STA-DTM-SG17 A group of segments to provide the necessary information for summary statistics with any related references and dates. 0640STA, Statistics A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed. 0650DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period. 0660 Segment group 17: RFF-DTM A Segment group of referencing documents relating to the statistics and where necessary, their dates. 0670RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0680DTM, Date/time/period A segment specifying the date/time of the referenced document. 0690 Segment group 18: TEM-MEA-DTM-SG19 A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates. 0700TEM, Test method A segment to describe the nature of the test performed. 0710MEA, Measurements A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed. 0720DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier. 0730 Segment group 19: RFF-DTM A Segment group of referencing documents relating to the test method and where necessary, their dates. 0740RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0750DTM, Date/time/period A segment specifying the date/time of the referenced document. 0760 Segment group 20: GIN-DTM-SG21-SG22 A group of segments to enable batch related information to be specified. 0770GIN, Goods identity number A segment providing specific serial or batch numbers, relating to the specified product. These may be single numbers or ranges of numbers. 0780DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. batch process date. 0790 Segment group 21: RFF-DTM A Segment group of referencing documents relating to the batch and where necessary, their dates. 0800RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0810DTM, Date/time/period A segment specifying the date/time of the referenced document. 0820 Segment group 22: CCI-PSD-SPS-DTM-FTX-SG23-SG24-SG26-SG28 A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified. 0830CCI, Characteristic/class id To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI- segment, then the individual properties must be specified within the related STA/MEA-segments. The Characteristic description (data element 7036) should only be used to enhance the meaning of the code value. If no specific code available, use code value ZZ (mutually defined) in DE 7037 and use DE 7036 to describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions. 0840PSD, Physical sample description A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group. 0850SPS, Sampling parameters for summary statistics A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group. 0860DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed. 0870FTX, Free text A segment with free text information to give further clarification. 0880 Segment group 23: RFF-DTM A segment group of referencing documents relating to the Analysis section and where necessary, their dates, e.g. Purchase order, shipment note. 0890RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0900DTM, Date/time/period A segment specifying the date/time of the referenced document. 0910 Segment group 24: MEA-DTM-SG25 A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement purpose code qualifier (6311) indicates the type of the values. 0920MEA, Measurements A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes. 0930DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time. 0940 Segment group 25: RFF-DTM A Segment group of referencing documents relating to the specifications and values and where necessary, their dates. 0950RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 0960DTM, Date/time/period A segment specifying the date/time of the referenced document. 0970 Segment group 26: STA-DTM-SG27 A group of segments to provide the necessary information for summary statistics with any related references and dates. 0980STA, Statistics A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed. 0990DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period. 1000 Segment group 27: RFF-DTM A Segment group of referencing documents relating to the statistics and where necessary, their dates. 1010RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 1020DTM, Date/time/period A segment specifying the date/time of the referenced document. 1030 Segment group 28: TEM-MEA-DTM-SG29 A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates. 1040TEM, Test method A segment to describe the nature of the test performed. 1050MEA, Measurements A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed. 1060DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier. 1070 Segment group 29: RFF-DTM A Segment group of referencing documents relating to the test method and where necessary, their dates. 1080RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 1090DTM, Date/time/period A segment specifying the date/time of the referenced document. 1100 Segment group 30: PRC-SG31-SG32 A group of segments to allow process related quality data to be specified. 1110PRC, Process identification A segment to specify the process/sub-process type and description to which the data is related. 1120 Segment group 31: NAD-LOC A group of segments identifying Names, Addresses and Locations relevant to the process. 1130NAD, Name and address A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the process. 1140LOC, Place/location identification A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number. 1150 Segment group 32: CCI-PSD-SPS-DTM-FTX-SG33-SG34-SG36-SG38 A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified. 1160CCI, Characteristic/class id To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Class type code (7059) or Measured attribute code (6313) or Characteristic description code (7037) must be present. If Class type code (7059) AND Measured attribute code (6313) are present, then Characteristic description code (7037) is not allowed. If only Class type code is used within the CCI- segment, then the individual properties must be specified within the related STA/MEA-segments. The data element Characteristic description (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics. NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions. 1170PSD, Physical sample description A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group. 1180SPS, Sampling parameters for summary statistics A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group. 1190DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed. 1200FTX, Free text A segment with free text information to give further clarification within Segment group 32: the Analysis Group. 1210 Segment group 33: RFF-DTM A segment group of referencing documents relating to the Analysis Section and where necessary, their dates, e.g. Purchase order, shipment note. 1220RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 1230DTM, Date/time/period A segment specifying the date/time of the referenced document. 1240 Segment group 34: MEA-DTM-SG35 A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement purpose code qualifier (6311) indicates the type of the values. 1250MEA, Measurements A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes. 1260DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time. 1270 Segment group 35: RFF-DTM A Segment group of referencing documents relating to the specifications and values and where necessary, their dates. 1280RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 1290DTM, Date/time/period A segment specifying the date/time of the referenced document. 1300 Segment group 36: STA-DTM-SG37 A group of segments to provide the necessary information for summary statistics with any related references and dates. 1310STA, Statistics A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed. 1320DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period. 1330 Segment group 37: RFF-DTM A Segment group of referencing documents relating to the statistics and where necessary, their dates. 1340RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 1350DTM, Date/time/period A segment specifying the date/time of the referenced document. 1360 Segment group 38: TEM-MEA-DTM-SG39 A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates. 1370TEM, Test method A segment to describe the nature of the test performed. 1380MEA, Measurements A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed. 1390DTM, Date/time/period A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier. 1400 Segment group 39: RFF-DTM A Segment group of referencing documents relating to the test method and where necessary, their dates. 1410RFF, Reference A segment identifying the referenced document by its number and where appropriate, a line number within that document. 1420DTM, Date/time/period A segment specifying the date/time of the referenced document. 1430UNT, Message trailer A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2 Segment index (alphabetical sequence by tag) BGM Beginning of message CCI Characteristic/class id COM Communication contact CTA Contact information DTM Date/time/period FTX Free text GIN Goods identity number IMD Item description LIN Line item LOC Place/location identification MEA Measurements NAD Name and address PIA Additional product id PRC Process identification PSD Physical sample description QTY Quantity RFF Reference SPS Sampling parameters for summary statistics STA Statistics TEM Test method UNH Message header UNT Message trailer

4.3 Message structure 4.3.1 Segment table Pos Tag Name S R HEADER SECTION 0010UNH Message header M 1 0020BGM Beginning of message M 1 0030DTM Date/time/period M 10 0040IMD Item description C 10 0050MEA Measurements C 10 0060FTX Free text C 5 0070 ----- Segment group 1 ------------------ C 10----------+ 0080RFF Reference M 1 | 0090DTM Date/time/period C 2-----------+ 0100 ----- Segment group 2 ------------------ C 10----------+ 0110NAD Name and address M 1 | 0120LOC Place/location identification C 5 | | 0130 ----- Segment group 3 ------------------ C 10---------+| 0140RFF Reference M 1 || 0150DTM Date/time/period C 2----------+| | 0160 ----- Segment group 4 ------------------ C 5----------+| 0170CTA Contact information M 1 || 0180COM Communication contact C 5----------++ DETAIL SECTION 0190 ----- Segment group 5 ------------------ C 200---------+ 0200LIN Line item M 1 | 0210PIA Additional product id C 10 | 0220IMD Item description C 10 | 0230MEA Measurements C 10 | 0240PSD Physical sample description C 1 | 0250SPS Sampling parameters for summary | statistics C 1 | 0260DTM Date/time/period C 10 | 0270QTY Quantity C 99 | 0280FTX Free text C 5 | | 0290 ----- Segment group 6 ------------------ C 10---------+| 0300RFF Reference M 1 || 0310DTM Date/time/period C 2----------+| | 0320 ----- Segment group 7 ------------------ C 10---------+| 0330NAD Name and address M 1 || 0340LOC Place/location identification C 5 || || 0350 ----- Segment group 8 ------------------ C 10--------+|| 0360RFF Reference M 1 ||| 0370DTM Date/time/period C 2---------+|| || 0380 ----- Segment group 9 ------------------ C 5---------+|| 0390CTA Contact information M 1 ||| 0400COM Communication contact C 5---------++| | 0410 ----- Segment group 10 ------------------ C 100--------+| 0420TEM Test method M 1 || 0430MEA Measurements C 100 || 0440DTM Date/time/period C 10 || || 0450 ----- Segment group 11 ------------------ C 10--------+|| 0460RFF Reference M 1 ||| 0470DTM Date/time/period C 2---------++| | 0480 ----- Segment group 12 ------------------ C 200--------+| 0490CCI Characteristic/class id M 1 || 0500PSD Physical sample description C 10 || 0510SPS Sampling parameters for summary || statistics C 10 || 0520DTM Date/time/period C 10 || 0530FTX Free text C 10 || || 0540 ----- Segment group 13 ------------------ C 10--------+|| 0550RFF Reference M 1 ||| 0560DTM Date/time/period C 2---------+|| || 0570 ----- Segment group 14 ------------------ C 999-------+|| 0580MEA Measurements M 1 ||| 0590DTM Date/time/period C 10 ||| ||| 0600 ----- Segment group 15 ------------------ C 10-------+||| 0610RFF Reference M 1 |||| 0620DTM Date/time/period C 2--------++|| || 0630 ----- Segment group 16 ------------------ C 100-------+|| 0640STA Statistics M 1 ||| 0650DTM Date/time/period C 10 ||| ||| 0660 ----- Segment group 17 ------------------ C 10-------+||| 0670RFF Reference M 1 |||| 0680DTM Date/time/period C 2--------++|| || 0690 ----- Segment group 18 ------------------ C 100-------+|| 0700TEM Test method M 1 ||| 0710MEA Measurements C 100 ||| 0720DTM Date/time/period C 10 ||| ||| 0730 ----- Segment group 19 ------------------ C 10-------+||| 0740RFF Reference M 1 |||| 0750DTM Date/time/period C 2--------+++| | 0760 ----- Segment group 20 ------------------ C 100--------+| 0770GIN Goods identity number M 1 || 0780DTM Date/time/period C 10 || || 0790 ----- Segment group 21 ------------------ C 10--------+|| 0800RFF Reference M 1 ||| 0810DTM Date/time/period C 2---------+|| || 0820 ----- Segment group 22 ------------------ C 200-------+|| 0830CCI Characteristic/class id M 1 ||| 0840PSD Physical sample description C 10 ||| 0850SPS Sampling parameters for summary ||| statistics C 10 ||| 0860DTM Date/time/period C 10 ||| 0870FTX Free text C 10 ||| ||| 0880 ----- Segment group 23 ------------------ C 10-------+||| 0890RFF Reference M 1 |||| 0900DTM Date/time/period C 2--------+||| ||| 0910 ----- Segment group 24 ------------------ C 999------+||| 0920MEA Measurements M 1 |||| 0930DTM Date/time/period C 10 |||| |||| 0940 ----- Segment group 25 ------------------ C 10------+|||| 0950RFF Reference M 1 ||||| 0960DTM Date/time/period C 2-------++||| ||| 0970 ----- Segment group 26 ------------------ C 100------+||| 0980STA Statistics M 1 |||| 0990DTM Date/time/period C 10 |||| |||| 1000 ----- Segment group 27 ------------------ C 10------+|||| 1010RFF Reference M 1 ||||| 1020DTM Date/time/period C 2-------++||| ||| 1030 ----- Segment group 28 ------------------ C 100------+||| 1040TEM Test method M 1 |||| 1050MEA Measurements C 100 |||| 1060DTM Date/time/period C 10 |||| |||| 1070 ----- Segment group 29 ------------------ C 10------+|||| 1080RFF Reference M 1 ||||| 1090DTM Date/time/period C 2-------++++| | 1100 ----- Segment group 30 ------------------ C 100--------+| 1110PRC Process identification M 1 || || 1120 ----- Segment group 31 ------------------ C 10--------+|| 1130NAD Name and address M 1 ||| 1140LOC Place/location identification C 5---------+|| || 1150 ----- Segment group 32 ------------------ C 200-------+|| 1160CCI Characteristic/class id M 1 ||| 1170PSD Physical sample description C 10 ||| 1180SPS Sampling parameters for summary ||| statistics C 10 ||| 1190DTM Date/time/period C 10 ||| 1200FTX Free text C 10 ||| ||| 1210 ----- Segment group 33 ------------------ C 10-------+||| 1220RFF Reference M 1 |||| 1230DTM Date/time/period C 2--------+||| ||| 1240 ----- Segment group 34 ------------------ C 999------+||| 1250MEA Measurements M 1 |||| 1260DTM Date/time/period C 10 |||| |||| 1270 ----- Segment group 35 ------------------ C 10------+|||| 1280RFF Reference M 1 ||||| 1290DTM Date/time/period C 2-------++||| ||| 1300 ----- Segment group 36 ------------------ C 100------+||| 1310STA Statistics M 1 |||| 1320DTM Date/time/period C 10 |||| |||| 1330 ----- Segment group 37 ------------------ C 10------+|||| 1340RFF Reference M 1 ||||| 1350DTM Date/time/period C 2-------++||| ||| 1360 ----- Segment group 38 ------------------ C 100------+||| 1370TEM Test method M 1 |||| 1380MEA Measurements C 100 |||| 1390DTM Date/time/period C 10 |||| |||| 1400 ----- Segment group 39 ------------------ C 10------+|||| 1410RFF Reference M 1 ||||| 1420DTM Date/time/period C 2-------+++++ 1430UNT Message trailer M 1